Hi Edwin

It would be good to have compatible plug in modules for Librerouter and MS14/Pan/MP2 to maximise volume of production.

The LoRa / ATmega module sounds very good , but it does not have RTC.

I guess we could use some spare I/O pins on the ATmega to communicate with an RTC module using I2C via the sensor connector.

This would be a very flexible auxillary module set up for the whole range of routers.

Regards
Terry

On 08/11/2016 4:26 PM, "edwin" <edwin@dragino.com> wrote:
>
> Btw, both the RTC under discussion and this lora can use the same socket.
>
>  
>
> Best Regards
> Edwin Chen
>
>  
>
> 发件人: edwin [mailto:edwin@dragino.com]
> 发送时间: 2016年11月8日 23:24
> 收件人: 'LibreRouter general discussion'
> 主题: 答复: [LibreRouter] xbee socket
>
>  
>
> Hi, Josep,
>
>  
>
> I am quite sure it is possible. We are making a LoRa module for openwrt, which can run in our device MS14 now. http://www.dragino.com/products/mother-board/item/71-ms14-p.html
>
>  
>
> Such module use the MS14 router socket. It is possible to put compatible header in Libre Router so it can support our module directly.
>
>  
>
> Best Regards
> Edwin Chen
>
>  
>
> 发件人: LibreRouter [mailto:librerouter-bounces@listas.librerouter.org] 代表 Josep Jordana
> 发送时间: 2016年11月8日 17:29
> 收件人: librerouter@listas.librerouter.org
> 主题: [LibreRouter] xbee socket
>
>  
>
> Hi, I am interested in using this XBee expansion socket (for GPS module or 4G module) but for a LORAWAN node/gateway IoT, at this moment I don't know if it is possible.
>
> They are more info about it, the XBee socket?
>
> The idea is to deploy TheThings Network (optionally) at the same time than guifinet (or other free networks)
>
> https://www.thethingsnetwork.org
>
>
> I was at the presentation in Barcelona, thanks Pau/Gui. Are the slides downloadable
> somewhere?
>
> Many thanks!
>
> SAX!
>
> Josep Jordana
>
>
> _______________________________________________
> LibreRouter mailing list
> LibreRouter@listas.librerouter.org
> https://listas.librerouter.org/mailman/listinfo/librerouter
>