Could you outline the use case for the two
Gigabit ports in use?
On 04/11/2016 1:31 PM, "fboehm" <fboehm(a)aon.at
<mailto:fboehm@aon.at>>
wrote:
According to the following document there's no separate switch chip
(like AR8327) within Librerouter. Therefore you would only have a
single Gigabit Ethernet interface.
https://librerouter.org/media/document/librerouter_specifications_v3.pdf
<https://librerouter.org/media/document/librerouter_specifications_v3.pdf>
Although the same document mentions "2x Gigabit Ethernet RJ-45".
If I understand the AR9344 datasheet correct, the second Gigabit
interface has to go through the internal 100Mbps switch. Therefore
the OS would show 1000Mbps but in real life you are limited to
100Mbps.
Not very nice :(
Franz
Am 2016-11-04 um 12:43 schrieb T Gillett:
The attached screenshot from the Atheros Reference circuit
shows the
AR9344 supporting 5 x 10/100 Ethernet ports and the AR8327 chip
supporting 5 x 10/100/1000 Ethernet ports.
On Fri, Nov 4, 2016 at 7:20 AM, fboehm <fboehm(a)aon.at
<mailto:fboehm@aon.at>
<mailto:fboehm@aon.at <mailto:fboehm@aon.at>>> wrote:
Am 2016-11-04 um 01:21 schrieb guifipedro:
Hi,
Specifications Sheet v3 from Librerouter says:
2 x Gigabit Ethernet RJ-45
This [1] (Preliminary version) says:
"The Ethernet switch is a highly integrated twoGb MAC
plus
5-port fast
Ethernet switch with non-blocking switch fabric"
I understand this means:
5-port fast Ethernet switch
2 x Gigabit ethernet RJ-45
But I don't see this 2 gigabit ethernet in the features
(first
page).
Is there a definitive version of what capabilities have
AR9344? PDF?
Cheers,
Pedro
_______________________________________________
LibreRouter mailing list
LibreRouter(a)listas.librerouter.org
<mailto:LibreRouter@listas.librerouter.org>
<mailto:LibreRouter@listas.librerouter.org
<mailto:LibreRouter@listas.librerouter.org>>
https://listas.librerouter.org/mailman/listinfo/librerouter
<https://listas.librerouter.org/mailman/listinfo/librerouter>
<https://listas.librerouter.org/mailman/listinfo/librerouter
<https://listas.librerouter.org/mailman/listinfo/librerouter>>
According to AR9344 datasheet GMAC1 (2nd Gigabit interface
in the
SoC) is hardwired to the Fast Ethernet switch. As this
switch is
only Fast Ethernet capable it's creating a bottleneck.
Only GMAC0 (1st Gigabit interface) provides externally
accessible
RGMII pins (Reduced Gigabit Media Independent Interface).
But I could be wrong :)
Franz
_______________________________________________
LibreRouter mailing list
LibreRouter(a)listas.librerouter.org
<mailto:LibreRouter@listas.librerouter.org>
<mailto:LibreRouter@listas.librerouter.org
<mailto:LibreRouter@listas.librerouter.org>>
https://listas.librerouter.org/mailman/listinfo/librerouter
<https://listas.librerouter.org/mailman/listinfo/librerouter>
<https://listas.librerouter.org/mailman/listinfo/librerouter
<https://listas.librerouter.org/mailman/listinfo/librerouter>>
_______________________________________________
LibreRouter mailing list
LibreRouter(a)listas.librerouter.org
<mailto:LibreRouter@listas.librerouter.org>
https://listas.librerouter.org/mailman/listinfo/librerouter
<https://listas.librerouter.org/mailman/listinfo/librerouter>
_______________________________________________
LibreRouter mailing list
LibreRouter(a)listas.librerouter.org
<mailto:LibreRouter@listas.librerouter.org>
https://listas.librerouter.org/mailman/listinfo/librerouter
<https://listas.librerouter.org/mailman/listinfo/librerouter>
_______________________________________________
LibreRouter mailing list
LibreRouter(a)listas.librerouter.org
https://listas.librerouter.org/mailman/listinfo/librerouter
_______________________________________________
LibreRouter mailing list
LibreRouter(a)listas.librerouter.org