Could you outline the use case for the two Gigabit  ports in use?


On 04/11/2016 1:31 PM, "fboehm" <fboehm@aon.at> wrote:
According to the following document there's no separate switch chip (like AR8327) within Librerouter. Therefore you would only have a single Gigabit Ethernet interface.

https://librerouter.org/media/document/librerouter_specifications_v3.pdf

Although the same document mentions "2x Gigabit Ethernet RJ-45".

If I understand the AR9344 datasheet correct, the second Gigabit interface has to go through the internal 100Mbps switch. Therefore the OS would show 1000Mbps but in real life you are limited to 100Mbps.

Not very nice :(

Franz

Am 2016-11-04 um 12:43 schrieb T Gillett:
The attached screenshot from the Atheros Reference circuit shows the
AR9344 supporting 5 x 10/100 Ethernet ports and the AR8327 chip
supporting 5 x 10/100/1000 Ethernet ports.

On Fri, Nov 4, 2016 at 7:20 AM, fboehm <fboehm@aon.at
<mailto:fboehm@aon.at>> wrote:

    Am 2016-11-04 um 01:21 schrieb guifipedro:

        Hi,

        Specifications Sheet v3 from Librerouter says:

        2 x Gigabit Ethernet RJ-45

        This [1] (Preliminary version) says:

        "The Ethernet switch is a highly integrated twoGb MAC plus
        5-port fast
        Ethernet switch with non-blocking switch fabric"

        I understand this means:
        5-port fast Ethernet switch
        2 x Gigabit ethernet RJ-45

        But I don't see this 2 gigabit ethernet in the features (first
        page).
        Is there a definitive version of what capabilities have AR9344? PDF?

        Cheers,
        Pedro
        _______________________________________________
        LibreRouter mailing list
        LibreRouter@listas.librerouter.org
        <mailto:LibreRouter@listas.librerouter.org>
        https://listas.librerouter.org/mailman/listinfo/librerouter
        <https://listas.librerouter.org/mailman/listinfo/librerouter>

    According to AR9344 datasheet GMAC1 (2nd Gigabit interface in the
    SoC) is hardwired to the Fast Ethernet switch. As this switch is
    only Fast Ethernet capable it's creating a bottleneck.

    Only GMAC0 (1st Gigabit interface) provides externally accessible
    RGMII pins (Reduced Gigabit Media Independent Interface).

    But I could be wrong :)

    Franz

    _______________________________________________
    LibreRouter mailing list
    LibreRouter@listas.librerouter.org
    <mailto:LibreRouter@listas.librerouter.org>
    https://listas.librerouter.org/mailman/listinfo/librerouter
    <https://listas.librerouter.org/mailman/listinfo/librerouter>




_______________________________________________
LibreRouter mailing list
LibreRouter@listas.librerouter.org
https://listas.librerouter.org/mailman/listinfo/librerouter


_______________________________________________
LibreRouter mailing list
LibreRouter@listas.librerouter.org
https://listas.librerouter.org/mailman/listinfo/librerouter