Second report regarding this,
One important thing is to know if you are using the master branch or
the develop branch (this also applies to bruno question on the other
thread).

The branch that needs to be used it the master branch, unless you are
developing the firmware.

If this is the case, then we might be talking about an issue!

Regards,

On Thu, 2017-11-02 at 22:37 +0200, Anthony Garcia wrote:
> HI Nicolas,
>
> Thank you for your quick response and continued support! I have
> reinstalled my sdk to rule out user error. When I try to load
> libremesh/encrypt-11s community profile as a test, Cooker sees the --
> community=libremesh/encrypt-11s switch but does not cook lime-
> defaults in the etc/config folder. I have unpacked my squashfs-root
> in the output to verify that the changes were not made. Strangely
> enough the wpad-mesh specified from the PACKAGES file is added but
> anything else in my root/etc/config folder is ignored. I am using the
> develop branch on a fresh install using the wireless-compat fix. Here
> is my pastebin log https://pastebin.com/bmxqtbbz
>
> I forgot to connect to the internet during the compile but all of the
> files were already updated/downloaded. I do not see any errors during
> compile. I have tried several other profiles with the same result.
> PACKAGES hook will compile.
>
> Regards,
>
> -Tony
>
> On Thu, Nov 2, 2017 at 9:51 PM, Nicolas Pace <nico@libre.ws> wrote:
> > On Wed, 2017-11-01 at 16:46 +0200, Anthony Garcia wrote:
> > > Hello Libremesh team, first and foremost thank you for your hard
> > work
> > > and effort that has gone into creating this platform. 
> >
> > Yes, a big kudos for every one of us for the community project we
> > are
> > doing! :)
> >
> > > I have a question regarding the creation of local network
> > profiles.
> > > Based on the directory structure for the community profiles
> > > established. In order to customize the firmware are we supposed
> > to
> > > place the lime-default file in  lime-
> > > sdk/communities/communityname/profilename/etc/config/
> >
> > Exactly!
> >
> > > When I specify my own custom profile, the cooked firmware is not
> > > customized using the "--community=name/profile"" switch. I can
> > > successfully cook the pre-existing network-profiles that were
> > > downloaded from the git. Is there any additional documentation
> > > regarding this function that I may have missed for local
> > development?
> > >
> >
> > No. It should work.
> >
> > Can you post the output of the command as well as the call to the
> > cooker command?
> >
> > Regards,
> >
> > _______________________________________________
> > lime-dev mailing list
> > lime-dev@lists.libremesh.org
> > https://lists.libremesh.org/mailman/listinfo/lime-dev
>
> _______________________________________________
> lime-dev mailing list
> lime-dev@lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-dev
_______________________________________________
lime-dev mailing list
lime-dev@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev