I think bullet M is ar71xx but PicoStation is Atheros 24xx (same of Fonera). So you should compile for such a target (named Atheros in OpenWrt).

Personally I don't recomend such devices since the CPU is very slow (180MHz), same for the internal flash. If you want a similar device buy a Bullet M2/M5 or Rocket M2/M5 which has a newer and faster CPU (400MHz).

Cheers.

On 01/14/14 00:55, Ilario Gelmetti wrote:
Hi all!
I compiled libre-mesh encountering only a small problem: subversion is
needed but missing in the dependencies list.
I was planning to flash libre-mesh on Ubiquiti PicoStation and Ubiquiti
NanoStation.
Can I safely flash using
libre-mesh/images/bin/openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-sysupgrade.bin
and openwrt-ar71xx-generic-ubnt-nano-m-squashfs-sysupgrade.bin or some
configuration is needed before compilation or after flashing?
Thanks and bye,
Ilario, Ninux Verona.




_______________________________________________
Dev mailing list
Dev@lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev