Well at least I'm not going mad then!  Could I perhaps ask for some general advice Mark on building a more up to date libremesh.  I'm running the released version but on another project I've found plain vanilla openwrt 18 is considerably better than 17.  Is there a sensible path to get a libremesh 18?  This is for a home lab, nothing fancy running only 3 nodes, so it doesn't need to be production quality.  I had hoped the development.html web page would be enough to give me working build options, but as you have seen, I'm not making much progress.

With v17, I make use of the distributed DHCP, although I could live without that if it was problematic.

Thanks in advance ...

yes, lime-proto-anygw disappear when selecting dnsmasq-lease-share.

but seems i dont use it for my builds. I use BATMAN-adv gw mode

On Sat, Jul 20, 2019 at 10:25 PM David Medland-Slater <david.medlandslater@gmail.com> wrote:

Yes that gives me the same result Mark.  For me then, at the point of
running menuconfig, lime-proto-anygw is visible.  Enable
dnsmasq-lease-share and it disappears.  As from the docs both need to be
selected, I appear to be stuck.

Do you get the same effect; selecting dnsmasq-lease-share makes
lime-proto-anygw disappear and if you search, it has been deselected?


On 21/07/19 6:58 am, Mark Birss wrote:
> echo "CONFIG_PACKAGE_dnsmasq=n" >> .config
> echo "CONFIG_PACKAGE_dnsmasq-dhcpv6=y" >> .config
> echo "CONFIG_PACKAGE_odhcpd=n" >> .config
> make defconfig
_______________________________________________
lime-dev mailing list
lime-dev@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev

_______________________________________________
lime-dev mailing list
lime-dev@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-dev