Thank you pau,
For now, i put a /etc/init.d/network restart in startup script and i’m not kicked anymore.
With this i can do all test i need.
Regards
On Tuesday, September 16, 2014, Pau <pau@dabax.net> wrote:
> I would need to test the images in my routers to reproduce your problem. However I've a lot of work to do these days and I'll be disconnected during this week, so I cannot help you now, sorry.
>
> @Others, please help Gabriel :)
>
> On 16/09/14 16:16, gabriel giovaniello wrote:
>> I tried with your new firmware upload but same issue, libremesh not appear
>> at boot, i need to shutdown and start wifi with physical button and i can
>> connect to wifi LiMe without being kicked.
>>
>> For testing purposes i will use firmware as is.
>>
>> Is any command-line i can use to do the same as wifi on/off with physical
>> button?
>> I’m thinking about startup command so can work without intervention.
>>
>> Sorry for being so noob.
>>
>> On Tuesday, September 16, 2014, gabriel giovaniello <gabrielgio@gmail.com>
>> wrote:
>> > Excellent!
>> > I will try right now.
>> >
>> >
>> > I Sept 13 compilation i found that if i shutdown wifi with physical
>> button of WR841ND and start again, appears libremesh network and Lime
>> network (before libremesh was not there) and i’m not kicked from wifi.
>> > So to be clear i will describe what i do and results:
>> > 1) flashed
>> > 2) connect with cable to lan and successfully receive IP
>> > 3) Connect another device from wifi and i receive IP but i’m disconnected
>> about 20 seconds.
>> >
>> > Log mention something about MTU i tried to change but still error there.
>> >
>> > If i shutdown wifi on router with wifi on/off button and start wifi again.
>> >
>> > In my wifi networks appears libremesh (before was not there) and i can
>> connect without kick.
>> >
>> >
>> > Here i attach Kernel Log of Sep 13 compilation, hope this help to figure
>> out what happened:
>> > [ 0.000000] Linux version 3.10.49 (lime@qmpbuild) (gcc version 4.8.3
>> (OpenWrt/Linaro GCC 4.8-2014.04 r41825) ) #230 Sat Sep 13 13:54:27 CEST 2014
>> > [ 0.000000] MyLoader: sysp=ab02aeab, boardp=a2abaaa2, parts=aa22aaaa
>> > [ 0.000000] bootconsole [early0] enabled
>> > [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
>> > [ 0.000000] SoC: Qualcomm Atheros QCA9533 rev 1
>> > [ 0.000000] Clocks: CPU:550.000MHz, DDR:399.389MHz, AHB:199.694MHz,
>> Ref:25.000MHz
>> > [ 0.000000] Determined physical RAM map:
>> > [ 0.000000] memory: 02000000 @ 00000000 (usable)
>> > [ 0.000000] Initrd not found or empty - disabling initrd
>> > [ 0.000000] Zone ranges:
>> > [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
>> > [ 0.000000] Movable zone start for each node
>> > [ 0.000000] Early memory node ranges
>> > [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
>> > [ 0.000000] On node 0 totalpages: 8192
>> > [ 0.000000] free_area_init_node: node 0, pgdat 802fca90, node_mem_map
>> 81000000
>> > ./p4u
>
>
--
Gabriel H. Giovaniello+54 2216230146