In-line.

On 13/07/16 15:50, Ilario wrote:

2016-07-13 15:39 GMT+02:00 p4u <pau@dabax.net>:

Hi.
After working and testing lime-build, I think we can publish again the
link to http://downloads.libre-mesh.org. I've tested (also Ilario) the
resulting images and they work fine.

Yep, lime-build is working but still I support the fact that we can't indicate two different sources for stable images: chef and downloads.

So I would keep downloads pointing to chef and I would open a new subdomain for downloading the development version of Libre-Mesh built with lime-build. For example unstable.libre-mesh.org or something similar.

I don't see any reason why Chef images would be more stable than lime-build release images. The only fact is the testing process which might be involved. However until we solve all this "mess" and we decide to go in a single direction, I accept your suggestion. Maybe instead of "unstable" (which is not the case because the release 15.09 should be stable) I would do "builds.libre-mesh.org" or something like that. Or maybe leave "downloads.libre-mesh.org" but announce on the web page that for the moment the safe way is to use the poor set of images provided by Chef ;)

 

Good point is that now we have many more targets (routers) available.

Yep, that's good!

 

I've even tested different architectures such as x86 (which works fine)
and RAMIPS (which does not work fine in Ad-Hoc but it does in 802.11s mode).

Wow!

 

We can discuss this deeper in some IRC meeting,

+10!

Can we log the meeting and publish the content on the website?

 

but I would like to
invite all developers to use lime-build (¿again?) for releasing stable
versions of libre-mesh and for keeping develop working for everyone.

Well, chef is now used for stable releases and that uses lime-build, right?

Not at all. These Images are manually compiled by Guido in some local machine. So there is no way to reproduce the same building unless you know the exact parameters Gui is using.

I hope in next Chef releases we would use the ImageBuilder generated by lime-build. So there will be an actual way to reproduce it.

_______________________________________________
Dev mailing list
Dev@lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev

_______________________________________________
Dev mailing list
Dev@lists.libre-mesh.org
https://lists.libre-mesh.org/mailman/listinfo/dev