Thanks Ilario, that is a lot of information.

I will need time to check it, compile and test.

At the moment, i have one more question.

I need to disable DHCP in the mesh, because it's received from "wan" (shoud be called upstream?). According to https://lists.libremesh.org/pipermail/lime-users/2017-November/000971.html, I will need only batadv?

I will try ASAP, tomorrow.

Regarding flashing process, .... thanks for the advice, but i've seven GL-B1300 with libremesh compiled some time ago.

I will keep you informed.

Thanks.

El lun., 13 ene. 2020 a las 18:33, Ilario Gelmetti (<iochesonome@gmail.com>) escribió:

On 1/13/20 6:30 PM, Ilario Gelmetti wrote:
> On 1/13/20 2:27 PM, Pedro Peña Sánchez wrote:
>> I've multiple routers to test, gl-mt300n, gl-ar300m, etc. but i want to
>> deploy gl-b1300. I've many to test.
>
> Seems a super nice router! Never tested :)
> Please tell us how it works with LibreMesh!

Beware that flashing those devices seems requires some special procedure:
https://forum.openwrt.org/t/how-can-i-flash-a-openwrt-image-on-gl-b1300/40757/3

--
Ilario
iochesonome@gmail.com
ilario@sindominio.net
_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users