hi Fred

Sounds like a fantastic plan. I don 't  have proper documentation. But the CPE's are running fine. We used them in two other networks with good results.

Let me know if you need any information regarding configuration or anything.

Best,
Bruno

On Tue, Nov 21, 2017 at 9:00 AM, fred <support@qo-op.com> wrote:
Hello,

I read about your experimentation. What results do you have now.
Have you made documentation about installation?

I could use your data to build a mesh network in Dominica (after
Hurricane devastation)

Thanks

Fred
http://madeinzion.org


Le 15/07/2017 à 19:34, bruno vianna a écrit :
> all credits to the chef cook!
>
> i'm preparing the documentation about the installation, will post here
> when it's done. but basically we got a grant from the state of rio to do
> a free networks workshop in the favela, which would of course end up in
> a functioning network. we got a link from the federal university nearby,
> which was a great push.
>
> we needed the gain, so there was no advantage to use another antenna.
> but i just saw the omnidirectional hack on the openwrt wiki, seems neat.
>
> we actually need to find a way of making a DIY directional antenna like
> the altermundi model. we never found a metalsmith who could replicate it
> here.
>
> b
>
> On Thu, Jul 13, 2017 at 8:22 PM, Nicolas Pace <nico@libre.ws
> <mailto:nico@libre.ws>> wrote:
>
>     Great Bruno!
>     That sounds Amazing!
>
>     Please, if you have any time tell us more about your deployment!.
>
>     On Thu, 2017-07-13 at 18:27 -0300, bruno vianna wrote:
>     > The reason I'm flashing these is that we installed a small network in
>     > a favela here last week, and
>
>
>     > the wdr3500 didn't have enough reach. Not only the nearest nods were
>     > far (anything from 200m to 2km), but also all the interference  we
>     > had (it's a really dense neighborhood) made any link with more than
>     > 100m very poor. The plan now is to connect the most important nodes
>     > with those.
>
>     Are you using the antenna that comes from factory, or using a custom
>     made one?
>     _______________________________________________
>     lime-users mailing list
>     lime-users@lists.libremesh.org <mailto:lime-users@lists.libremesh.org>
>     https://lists.libremesh.org/mailman/listinfo/lime-users
>     <https://lists.libremesh.org/mailman/listinfo/lime-users>
>
>
>
>
> --
>
> bruno@pobox.com <mailto:bruno@pobox.com> ▀─█▄██▄▀▄
> http://brunovianna.net <http://brunovianna.net/> ─█▄██▄▀█▀█▄
> skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
>
>
>
>
>
> _______________________________________________
> lime-users mailing list
> lime-users@lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-users
>

_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users



--

bruno@pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌