On 03/05/17 20:35, Nk via lime-users wrote:

Hi all

I’m trying to test 802.11s on TP-LINK Archer C7 especially since I can’t
get Ad-hoc working on 5GHz [I’ve read the thread where they got it
working, but don’t want to do a super-custom config for this, AND I’m
very interested in trying 802.11s also since I read it’s probably the
future of LiMe (p4u also personally wrote this to me in the past)].

I’ve tried taking the basic 1607 config and adding

list modes ‘ieee80211s'


but it doesn’t work. I’ve tried messing around with the

option mesh_mesh_fwding '0'
option mesh_mesh_id 'LiMe'


options but I must be doing something wrong. Could someone tell me the
exact diff that must be applied to get this working? I am including both
*wpad* and *authsae* as packages and removing woad-mini.

5 months ago i helped a friend (drebs) to run a couple of archer c7 with
LiMe 16.07. It was definitely not trivial.
The default firmware shipped with chaos calmer for ath10k doesn't
support mesh mode. You have to use a very specific version mentioned in
https://github.com/o11s/open80211s/wiki/ath10k-(802.11ac)-for-Mesh-Support
"firmware-5.bin_10.2.4.70.6-2"
netifd also doesn't properly set up 80211s interfaces, and they come up
without HT speeds

past that, the /etc/config/lime change is trivial (basically, replace
adhoc with ieee80211s)

complete diff i did:
https://chef.altermundi.net/diff/libremeshorg-1607/kalungas-1607/

(i didn't mess with wpad or whatever)

I’ll be happy to report back with any results.

Thank you very much in advance and sorry for the noob question here.

Nk


On 3 mag 2017, 18:07 +0200, Ruairi Hickey
<ruairi.hickey-lime@collon.ie>, wrote:

On Tuesday 2 May 2017 23:15:40 IST Ruairi Hickey wrote:

---------- Forwarded Message ----------

Subject: Re: [lime-users] 802.11s config
Date: Tuesday 2 May 2017, 21:48:57 IST
From: Ruairi Hickey <ruairi.hickey-mesh@collon.ie
To: lime-users@lists.libremesh.org

On Wednesday 26 April 2017 12:47:04 IST you wrote:

I'll try to setup a testbed for testing 802.11s at my place and let you
know the results.

In any case, it would be better if you can use the last pre-release for
libremesh: http://repo.libremesh.org/lime-17.04

Cheers.

On 20/04/17 20:04, Ruairi Hickey wrote:

On Thursday 20 April 2017 11:34:09 IST you wrote:

On 19/04/17 20:46, Ruairi Hickey wrote:

On Wednesday 19 April 2017 19:29:59 IST Ilario Gelmetti wrote:

On 04/19/2017 05:25 PM, Ruairi Hickey wrote:

While the mesh appears to be up and the stations can see each other
there is no ip connectivity - if a client is connected to the
libremesh.org
via AP node d9:18:6e it can not connect to the internet / outside
via
AP
d9:44:80.

Hi Ruairi!
Have you plugged an internet connection to a WAN port of your
router?
If your router doesn't have a WAN port you will have to configure
another one as WAN (check out /etc/config/lime-example and
http://libremesh.org/docs/changing_network_behavior.html ).
If this doesn't work: can you post the content of
/etc/config/network
on
your LibreMesh router?
And the output of the "ip address show" commend.

Are there additional steps required to enable this (it works
out of the box on ad- hoc) ?

No, it should automagically work when you plug the WAN port of the
LiMe
router into a LAN port of a router offering a DHCP server and a
gateway
to the internet.
Let us know!
Ilario

Hi Ilario,

The WAN port is connected to the switch and if that is the only
router in

up / or if I connect to that when connecting to SSID libremesh.org I
can
connect to the internet.

If I connect to either of the other 2 nodes I cannot connect to
the

Internet...

The link layer seems to work fine in your setup, so the problem is
proably in the mac or ip layer. Please, run the next test and attach
the
output:

Run "bmx6 -c originators" to see all nodes in the network.

Run "bmx6 -c links" to see the one-hop nodes

Run "batctl o" to see the layer2 nodes

Run "bmx6 -cp" on the node with Internet connection to see if the
tunIn
for sharing Internet is enabled (inet4).

Cheers.

I've attached 2 text files (one for each router with the file
contents)
router connected to switch (WAN port) / Internet
router-d94040.txt

router in mesh
router-d94480.txt

Thanks,

Ruairi

(if the attachments get stripped I'll resend with the contents
inline..)



_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users

Hi,

If it would be of assistance I can give you ssh access to the router
... I

have it behind a static IP, just need to open up the firewall.

Ruairi

Hi,
Apologies, I missed one of your emails last week ... thought it was a
duplicate send....I will run the bmx6 commands etc when the I manage to
resolve the issue below....

I have installed the image from 26.04 on the routers last night but
there is
an error bringing up the wlan0-mesh interface

Thu Apr 27 13:54:26 2017 kern.info kernel: [ 20.659483] IPv6:
ADDRCONF(NETDEV_UP): wlan0-mesh: link is not ready
Thu Apr 27 13:54:26 2017 daemon.notice netifd: radio0 (913): command
failed:
Resource busy (-16)
Thu Apr 27 13:54:26 2017 daemon.notice netifd: radio0 (913): command
failed:
Link has been severed (-67)


Thanks,
Ruairi





-----------------------------------------
_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users

Hi,
Do I need the wpad-mesh pkg installed - Does wpad-mini support 80211s ?

Thanks
Ruairi
_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users

_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users

_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users