> From: iochesonome@gmail.com
> Date: Sun, 31 May 2015 14:02:12 +0200
> To: users@lists.libre-mesh.org
> Subject: Re: [lime-users] LiMe broken. (was Re: New mesh network in Oaxaca)
>
> 2015-05-31 12:44 GMT+02:00 Gio <gio@diveni.re>:
> > On Tuesday, May 26, 2015 10:47:44 AM Ilario wrote:
> >>
> >> Yep, lime-defaults is ignored by lime-config
> >
> > Wrong!
>
> Oops, sorry for my wrong answer.
>
> > /etc/config/lime-defaults is not ignored, it is used often more than
> > /etc/config/lime, the difference is that lime-defaults is not supposed to be
> > edited by the user while /etc/config/lime is supposed to be edited by the user,
> > and that if a configuration is present both on lime and lime-defaults the one
> > in /etc/config/lime is preferred as it is supposed to be set by the user
>
> Thanks, now it's quite clear.
> I can't find any documentation about LiMe configuration (apart the
> very basic one that I wrote in Italian [1] where there's also
> explained that configuration from lime-defaults is always applied,
> LOL! There is also another document in Italian written by NinuxBO
> [2]).
> I think it's time to have such a documentation, so I started a new
> wiki page about configuration on libre-mesh website [3], you're
> invited to contribute :D
> Ciao!
> Ilario
>
> [1] http://wiki.ninux.org/Libre-Mesh#Configurazione
> [2] https://wiki.bologna.ninux.org/mediawiki/index.php/CompilareDaOpenWrt
> [3] https://libre-mesh.org/projects/libre-mesh/wiki/Configuration
> _______________________________________________
> users mailing list
> users@lists.libre-mesh.org
> https://lists.libre-mesh.org/mailman/listinfo/users