We are using SAE with a pre-shared-key as well as BMX7 with signed
routing information to implement granular access control to our local
mesh and gateway here in Leipzig. Which issue are you refering to and
what do you mean by 'vanished'?
When I set up /etc/config/lime config file with the options from this PR:
(After having installed the required wpad-mesh dependency)
And applying the config, the SSIDs for the AP and mesh SSID both disappeared from my scan lists when I tried to connect with a laptop or phone.
When I looked into it some more I saw the comment that this configuration might(?) require two radios, one for the mesh and one for the AP. Unfortunately in my lab I only have one router with two radios, the other only has one.
I might try to configure the two-radio router to only use the 11s encryption on one radio, then bridge the AP network somehow, but not sure where to start.
Is there some detailed documentation I can follow for your (or a similar) setup? I haven't tried rolling my own build yet, I feel that's the next step...
I think the thing tripping me up is that I don't know where to start figuring this out.
If you have some resources I can use to get up to speed on how it all fits together I can figure it out, I'm new to OpenWRT, so I may have bitten off more than I can chew!
Cheers,
Martin