I would set up the VPN only on the gayeway node.

If opkg is not installed it is because you used the mini-basic image of lime. I would suggest to use a good hardware for gateway, something with at least 8 or 16 MB of flash. Then do no use the mini firmware, but the generic one.

On 31 de gener de 2017 2:34:07 GMT-03:00, Marvin Arnold <marvin@unplugged.im> wrote:
I would like to finally make my internet at home available to my
neighbors over lime. I called my ISP and they made it pretty clear they
would take action against me if one of the users accessed illicit
content. So I'm thinking about routing all web traffic through a VPN. Is
this the most sensible thing to do?

Assuming it is, I already setup the VPN server and now I'm trying to
connect my lime router as a client.

http://wiki.openwrt.org/inbox/vpn.howto

https://www.robertkehoe.com/2015/08/setup-openvpn-using-openwrt/

But as far as I can tell, opkg is not installed on the router. What's
the best way to install it or install the openvpn client without it?




lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.