Hi all,
flashed the precompiled binary.

Interface WAN does not come up WAN6 does. So I can't test stability in concern of internet traffic.
Minor flaw: Meshpoint SSID isn't set as usual.
About every 10 sec dmesg:  br-lan: received packet on bat0 with own address as source address
Devices mesh as expected.

Cheers

Pau <pau@dabax.net> schrieb am Mo., 22. Mai 2017 um 11:15 Uhr:


On 21/05/17 23:30, Juergen Kimmel wrote:
> Hi Ilario you got me. Has been a typo - minus instead of underscore -.
> So this time output ok.
> But also this firmware ends in a bootloop triggered by traffic.
> Still waiting for daniel golle's efforts on mt7620 drivers
>
> Cheers

Hi Jurgen.

There is a patch which may fix some stuff related with 802.11s, but it
is not applied automatically. Please, make sure you are using the last
lime-sdk (execute git pull).

You have to manually execute a script snippet like this:

bash snippets/patch_sdk_mac80211.sh

Then recompile the packages:

./cooker -b ramips/mt7620

And finally cook the firmware

./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii

Recently I added a way to enable 11s by default (instead of adhoc) in
the firmware, you have to use a community profile like this:

./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
--community=libremesh/11s

** the communities profiles are listed here:
https://github.com/libremesh/network-profiles

** read the README.md of lime-sdk to understand what a community profile is.

You can also download precompiled binaries with the patch and 11s
enabled from here:

http://repo.libremesh.org/lime-17.04/targets/ramips/mt7620/zbt-ape522ii/lime_default/

Please, let us know if it works for you. I don't have this hardware and
I cannot test by myself.

Cheers.

>
> Ilario Gelmetti <iochesonome@gmail.com> schrieb am So., 21. Mai 2017 um
> 11:42 Uhr:
>
>> On 05/20/2017 11:55 PM, Juergen Kimmel wrote:
>>> Cooking went flawlessly but output has been a vanilla Lede  firmware.
>>> Did I overlook something?
>>
>> Can you post the cooker command you used?
>> I tried to replicate using:
>> ./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
>> --update-feeds
>>
>> and I got:
>> ls output/ramips/mt7620/zbt-ape522ii/lime_default/
>> lede-17.01.1-libremesh-ramips-mt7620-device-zbt-ape522ii.manifest
>> lede-17.01.1-libremesh-ramips-mt7620-zbt-ape522ii-squashfs-sysupgrade.bin
>> sha256sums
>>
>> I can't verify if the image works but I can say it contains many
>> LibreMesh related files, using:
>> binwalk -e
>> lede-17.01.1-libremesh-ramips-mt7620-zbt-ape522ii-squashfs-sysupgrade.bin
>>
>> Did you use a different lime-sdk command?
>> Can you check the firmware image content with binwalk (is there any
>> other way)?
>> Bye!
>> Ilario
>>
>>
>> _______________________________________________
>> lime-users mailing list
>> lime-users@lists.libremesh.org
>> https://lists.libremesh.org/mailman/listinfo/lime-users
>
>
>
> _______________________________________________
> lime-users mailing list
> lime-users@lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-users
>

--
./p4u

_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users