On Thu, Mar 28, 2019 at 02:08:23AM +0100, Pau wrote:
> Thanks for the info Daniel, you should make a monthly report to the
> mailing list regarding new hardware stories :)
> I found this very nice solution
> That looks quite a better (and cheaper) choice rather than the
Well, it only 100MBit/s fast Ethernet while 802.11AC can do
significantly more throughput... This is sad, because rather then
giving it 3 FastEthernet ports they should have added a external
RGMII phy and just a single Gigabit Ethernet port (the MT7620A chip
would potentialls support that). Also the board in the photo doesn't
have external PA/LNA populated and therefore will not have very good
> However maybe there is not (yet) OpenWRT target. It would be nice to
> have it :) Please, report back any advice regarding this board.
> On 27/3/19 21:33, Kleper wrote:
> > Hello,
> > I write to ask in the list that brand and references of equipment
> > designed to work outdoors can recommend me different from the brand
> > Ubiquiti because for a couple of months we have been having trouble
> > changing the firmware to this brand computers that are supposedly
> > compatible but come with a new firmware version and do not allow the
> > installation of libreMesh.
> > I hope you can give us more information about it.
> > Thank you.
> > Fernando Castro T
> > _______________________________________________
> > lime-users mailing list
> > email@example.com
> > https://lists.libremesh.org/mailman/listinfo/lime-users
> lime-users mailing list
lime-users mailing list