Does anyone have LiMe working on a Raspberry Pi 3? I can boot up
the latest RPI-3 image and get the eth0 port connected to my WAN
uplink, but the mesh doesn't work and the AP is not broadcasting any
SSIDs. The SSIDs all show "Wireless is disabled or not
associated" and the wlan0-mesh_13 interface shows
DOWN on the BMX6 Status page.
I get two errors during init:
[ 10.862080] brcmfmac: brcmf_cfg80211_add_iface: iface validation
failed: err=-16
[ 12.117179] brcmfmac: brcmf_cfg80211_get_channel: chanspec failed
(-1)
The brcmf_cfg80211_add_iface error traces back to this code in
cfg80211_change_iface() in net/wireless/util.c:
/* if it's part of a bridge, reject
changing type to station/ibss */
if ((dev->priv_flags & IFF_BRIDGE_PORT) &&
(ntype == NL80211_IFTYPE_ADHOC ||
ntype == NL80211_IFTYPE_STATION ||
ntype == NL80211_IFTYPE_P2P_CLIENT))
return -EBUSY;
which seems to imply that this can't work (bridging an AdHoc
interface). Or maybe the AdHoc mode has to be set before the bridge
is added?
Any suggestions or pointers would be greatly appreciated.
Thanks
Bob