for interface status, a good command is:

ip a s

this means ip address show.

On Sun, Aug 5, 2018 at 7:34 PM, amuza <amuza@riseup.net> wrote:

Hi,

I had a node working ok with LiMe 16.07. It is a TP-Link WR2543ND.

I tried to upgrade it to LiMe 17.06 using the sysupgrade.bin image from
my network profile on chef.libremesh.org

After restarting it did not publish any SSID. I connected through
Ethernet and I was able to go into luci with my browser (http://anygw/).
In Administration > Network > Wireless I could see the SSID modes were
on "Client"

Then I tried by upgrading it with the factory.bin image.
I had the same results, but this time I see the mode for the three SSIDs
is "Unknown".

- How do I check those things (like interface status) through commands?
- Any suggestion on how to troubleshoot to make this router work with LiMe 17.06? There must be something wrong in the image.

Cheers!



_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users