I'm so sorry lost orientation once moree, should be at sleep at this time of the night ;).

So here is network after changing line 178, reboot and lime-config:

config interface 'loopback'

option ifname 'lo'

option proto 'static'

option ipaddr '127.0.0.1'

option netmask '255.0.0.0'

config globals 'globals'

config interface 'lan'

option type 'bridge'

option proto 'static'

option ip6assign '60'

option ip6addr '2a00:1508:a0d:fe00::16:da88/64'

option ipaddr '10.13.218.136'

option netmask '255.255.0.0'

option mtu '1500'

list ifname 'bat0'

list ifname 'eth0.1'

config device 'lan_dev'

option name 'eth0.1'

option macaddr '78:a3:51:16:da:88'

config interface 'wan'

option ifname 'eth0.2'

option proto 'dhcp'

config device 'wan_dev'

option name 'eth0.2'

option macaddr '78:a3:51:16:da:89'

config interface 'wan6'

option ifname 'eth0.2'

option proto 'none'

config switch

option name 'switch0'

option reset '1'

option enable_vlan '1'

config switch_vlan

option device 'switch0'

option vlan '1'

option ports '0 1 2 3 6t'

config switch_vlan

option device 'switch0'

option vlan '2'

option ports '4 6t'

config device 'lm_net_br_lan_anygw_dev'

option type 'macvlan'

option name 'anygw'

option ifname 'br-lan'

option macaddr 'aa:aa:aa:0d:fe:aa'

config interface 'lm_net_br_lan_anygw_if'

option ifname 'anygw'

option auto '1'

option netmask '255.255.0.0'

option proto 'static'

option ipaddr '10.13.0.1'

option ip6addr '2a00:1508:a0d:fe00::1/64'

config rule6 'lm_net_anygw_rule6'

option src '2a00:1508:a0d:fe00::1/128'

option lookup '170'

config route6 'lm_net_anygw_route6'

option interface 'lm_net_br_lan_anygw_if'

option target '2a00:1508:a0d:fe00::/64'

option table '170'

config rule 'lm_net_anygw_rule4'

option src '10.13.0.1/32'

option lookup '170'

config route 'lm_net_anygw_route4'

option interface 'lm_net_br_lan_anygw_if'

option target '10.13.0.0'

option netmask '255.255.0.0'

option table '170'

config interface 'lm_net_batadv_dummy_if'

option ifname 'dummy0'

option macaddr 'aa:a3:51:16:da:88'

option proto 'batadv'

option mesh 'bat0'

config device 'lm_net_lm_net_eth0_1_bmx6_dev'

option type '8021ad'

option name 'eth0-1_13'

option ifname 'eth0.1'

option vid '13'

option mtu '1398'

config interface 'lm_net_eth0_1_bmx6_if'

option proto 'none'

option auto '1'

option ifname 'eth0-1_13'

config interface 'lm_net_wlan1_adhoc'

option proto 'none'

option mtu '1536'

option auto '1'

config device 'lm_net_lm_net_wlan1_adhoc_batadv_dev'

option type '8021ad'

option name 'wlan1-adhoc_29'

option ifname '@lm_net_wlan1_adhoc'

option vid '29'

option mtu '1532'

config interface 'lm_net_wlan1_adhoc_batadv_if'

option auto '1'

option ifname 'wlan1-adhoc_29'

option proto 'batadv'

option mesh 'bat0'

config device 'lm_net_lm_net_wlan1_adhoc_bmx6_dev'

option type '8021ad'

option name 'wlan1-adhoc_13'

option ifname '@lm_net_wlan1_adhoc'

option vid '13'

option mtu '1398'

config interface 'lm_net_wlan1_adhoc_bmx6_if'

option auto '1'

option ifname 'wlan1-adhoc_13'

option proto 'static'

option ipaddr '169.254.218.136'

option netmask '255.255.255.255'

config device 'lm_net_lm_net_eth0_2_batadv_dev'

option type '8021ad'

option name 'eth0-2_29'

option ifname 'eth0.2'

option vid '29'

option mtu '1532'

config interface 'lm_net_eth0_2_batadv_if'

option auto '1'

option ifname 'eth0-2_29'

option proto 'batadv'

option mesh 'bat0'

config device 'lm_net_lm_net_eth0_2_bmx6_dev'

option type '8021ad'

option name 'eth0-2_13'

option ifname 'eth0.2'

option vid '13'

option mtu '1398'

config interface 'lm_net_eth0_2_bmx6_if'

option proto 'none'

option auto '1'

option ifname 'eth0-2_13'

config interface 'lm_net_wlan0_adhoc'

option proto 'none'

option mtu '1536'

option auto '1'

config device 'lm_net_lm_net_wlan0_adhoc_batadv_dev'

option type '8021ad'

option name 'wlan0-adhoc_29'

option ifname '@lm_net_wlan0_adhoc'

option vid '29'

option mtu '1532'

config interface 'lm_net_wlan0_adhoc_batadv_if'

option auto '1'

option ifname 'wlan0-adhoc_29'

option proto 'batadv'

option mesh 'bat0'

config device 'lm_net_lm_net_wlan0_adhoc_bmx6_dev'

option type '8021ad'

option name 'wlan0-adhoc_13'

option ifname '@lm_net_wlan0_adhoc'

option vid '13'

option mtu '1398'

config interface 'lm_net_wlan0_adhoc_bmx6_if'

option auto '1'

option ifname 'wlan0-adhoc_13'

option proto 'static'

option ipaddr '169.254.218.137'

option netmask '255.255.255.255'

config device 'lm_net_lm_net_eth0_bmx6_dev'

option type '8021ad'

option name 'eth0_13'

option ifname 'eth0'

option vid '13'

option mtu '1398'

config interface 'lm_net_eth0_bmx6_if'

option proto 'none'

option auto '1'

option ifname 'eth0_13'

Ilario Gelmetti <iochesonome@gmail.com> schrieb am Fr., 14. Apr. 2017 um 13:39 Uhr:

On 04/14/2017 05:53 AM, Juergen Kimmel wrote:
> Here is
> /etc/config/network
>
> config device 'lan_dev'
> option name 'eth0.1'
> option macaddr '78:a3:51:16:da:88'
>
> config device 'wan_dev'
> option name 'eth0.2'
> option macaddr '78:a3:51:16:da:89'

Ok, now can you try to comment out (prepending "--!") line 178 in
/usr/lib/lua/lime/network.lua ?

function owrt_device_parser(section)
dev_parser(section["name"])
--! dev_parser(section["ifname"])
end

https://github.com/libremesh/lime-packages/blob/develop/packages/lime-system/files/usr/lib/lua/lime/network.lua#L178

According to LEDE and OpenWrt wikis [1,2], sections of type device in
/etc/config/network should have an ifname option.
LibreMesh scripts assume that there is such option and the crash you
experienced could be due to the lack of an "option ifname 'eth0'" in
device sections in /etc/config/network on ramips.
I hope this works... :)
Ilario

[1] https://wiki.openwrt.org/doc/uci/network#devices
[2] https://lede-project.org/docs/user-guide/switch_configuration#devices

_______________________________________________
lime-users mailing list
lime-users@lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users