8 Nov
2016
8 Nov
'16
3:36 p.m.
Hi Edwin
It would be good to have compatible plug in modules for Librerouter and
MS14/Pan/MP2 to maximise volume of production.
The LoRa / ATmega module sounds very good , but it does not have RTC.
I guess we could use some spare I/O pins on the ATmega to communicate with
an RTC module using I2C via the sensor connector.
This would be a very flexible auxillary module set up for the whole range
of routers.
Regards
Terry
On 08/11/2016 4:26 PM, "edwin" <edwin(a)dragino.com> wrote:
Btw, both the RTC under discussion and this lora can use the same socket.
Best Regards
Edwin Chen
发件人: edwin [mailto:edwin@dragino.com]
发送时间: 2016年11月8日 23:24
收件人: 'LibreRouter general discussion'
主题: 答复: [LibreRouter] xbee socket
Hi, Josep,
I am quite sure it is possible. We are making a LoRa module for openwrt,
which can
run in our device MS14 now.
http://www.dragino.com/products/mother-board/item/71-ms14-p.html
Such module use the MS14 router socket. It is possible to put compatible
header in
Libre Router so it can support our module directly.
Best Regards
Edwin Chen
发件人: LibreRouter [mailto:librerouter-bounces@listas.librerouter.org] 代表
Josep
Jordana
发送时间: 2016年11月8日 17:29
收件人: librerouter(a)listas.librerouter.org
主题: [LibreRouter] xbee socket
Hi, I am interested in using this XBee expansion socket (for GPS module
or 4G
module) but for a LORAWAN node/gateway IoT, at this moment I don't
know if it is possible.
They are more info about it, the XBee socket?
The idea is to deploy TheThings Network (optionally) at the same time
than guifinet
(or other free networks)
https://www.thethingsnetwork.org
I was at the presentation in Barcelona, thanks Pau/Gui. Are the slides
downloadable
somewhere?
Many thanks!
SAX!
Josep Jordana
_______________________________________________
LibreRouter mailing list
LibreRouter(a)listas.librerouter.org
https://listas.librerouter.org/mailman/listinfo/librerouter