devices: ape522ii, picostation m2, wr841 v8
running lime-config after flashing:
root@LiMe-0952a5:~# lime-config
Clearing wireless config...
Clearing network config...
Disabling odhcpd
Cleaning dnsmasq
Disabling 6relayd...
WARNING: Attempt to access undeclared default for: network.anygw_mac
stack traceback:
/usr/lib/lua/lime/config.lua:24: in function 'get'
/usr/lib/lua/lime/proto/anygw.lua:12: in function 'anygw_mac'
/usr/lib/lua/lime/proto/anygw.lua:21: in function 'configure'
/usr/lib/lua/lime/network.lua:230: in function
</usr/lib/lua/lime/network.lua:230>
[C]: in function 'xpcall'
/usr/lib/lua/lime/network.lua:230: in function
</usr/lib/lua/lime/network.lua:210>
[C]: in function 'xpcall'
/usr/bin/lime-config:45: in function 'main'
/usr/bin/lime-config:65: in main chunk
[C]: ?
WARNING: Attempt to access undeclared default for: network.bmx6_pref_gw
stack traceback:
/usr/lib/lua/lime/config.lua:24: in function 'get'
/usr/lib/lua/lime/proto/bmx6.lua:85: in function 'configure'
/usr/lib/lua/lime/network.lua:230: in function
</usr/lib/lua/lime/network.lua:230>
[C]: in function 'xpcall'
/usr/lib/lua/lime/network.lua:230: in function
</usr/lib/lua/lime/network.lua:210>
[C]: in function 'xpcall'
/usr/bin/lime-config:45: in function 'main'
/usr/bin/lime-config:65: in main chunk
[C]: ?
Configuring system...
Let uhttpd listen on IPv4/IPv6
Hi,
I can change the hostname in some routers. I do it by editing the
hostname at /etc/config/system and then I run the lime-config command.
That works fine in some TP-Link routers I tried, but it does not seem
work on two Nanostation M5 routers I have. They do not keep the manually
configured name, but the autoconfigured by LibreMesh. Why? Any suggestion?
Crappy workarounds are welcome too!
Good meshing,
Please do not feel pushed, I am just happily asking things here.
Is there any estimate on when there will be an official captive portal
solution?
In the meantime, is there anything that more or less works with Libremesh?
Sorry to come back again with this topic, we had many emails around
saying different things and I got confused.
Cheers
Trying to use COOKER i been getting errors with not being to install
lime-full or other lime "collections"
It seems to be a problem with old BUILDROOM method to
The first time i did it I was able to compile using BUILD ROOT
When i tried to re-produce the steps collections area was completly
blank, this is where lime-full was located
has something broken in the feeds?
