Buenas!
Les comparto la sistematización de 2 talleres que hicimos en una escuela de
Tandil, BsAs, Argentina.
La idea es que compartirlo para mejorarlo, y poder armar una base de datos
con propuestas pedagógicas para trabajar estas temáticas con distintos
tipos de públicos, dependiendo de el tiempo disponible, los conocimientos
previos, etc.
El informe está acá
https://docs.google.com/document/d/1vVGKNIqdSi1wybrrIh1Bszz6dKl_KcSbCBv-KHJ…
(Pueden hacer comentarios)
Saludos!
Santiago
I just cooked a firmware with the cooker for the tp-link cpe-510. It is
similar to the nano loco m5 - 45 degrees horizontal angle, 13dbi, and 5ghz
only in this case. Costs around USD 65 here.
Everything seems to be fine. It uses adhoc mode by default, so it connected
immediately to a wdr3500 with lime 1605 from another network which I had
lying around.
The reason I'm flashing these is that we installed a small network in a
favela here last week, and the wdr3500 didn't have enough reach. Not only
the nearest nods were far (anything from 200m to 2km), but also all the
interference we had (it's a really dense neighborhood) made any link with
more than 100m very poor. The plan now is to connect the most important
nodes with those.
Abraços
Bruno
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
Hi !! My name is Martín Bayo , I'm from Santa Fe, Argentina.
With Martín Morales we are doing our first steps on libremesh , we tried
to build the image for TP Link 740 V4 without web interface , but the
image never finish to cooked , any idea ?
Thanks
--
---
Saludos
Martín Bayo
https://gnusocial.net/martinbayo
I'm just testing using the latest "default" firmware. Does anybody has a
step by step guide to enabling the authentication for the Mesh nodes
? there is no option for security for 802.11s in default and I couldn't
find a step by step guide for that ?
Anybody could create a default (LEDE) with authentication / security for
802.11S enable ? - Archer C7 v2
thanks.
hi
I'm trying to cook an image with very simple community settings - basically
just the SSID in lime-defaults. It cooks successfully, but when I check the
output image with binwalk or try to flash a router, all I get is the
default LibreMesh settings.
I tried with other community profiles downloaded from github, with
different router models, always with same results. I'm using community
files in my computer, and updated the feeds to the latest version.
What could be going on?
Also, the online imagebuilder is not very helpful today - it gets stuck
forever "building image".
Thanks!
--
bruno(a)pobox.com ▀─█▄██▄▀▄
http://brunovianna.net ─█▄██▄▀█▀█▄
skype: randomico▀─█▄██▄▀█▀█▄▌██─█▌█▌
Hi all,
I am using libremesh on my APs but I made all of them dump APs, that
is, I disabled the dhcp server.
I have two APs: A, B, C
A is the exit node. A is connected to a router via ethernet and
receives dhcp from this router.
B and C are meshed to A but receive dhcp via router.
Now, when libremesh node is not serving dhcp, what is the purpose of
anygw interface?
Can I remove it?
Thanks!
Hi All
Anyone else using Orange Pi boards with libremesh ?
Currently im not able to get it working unless i put in 2 additional
supported usb wifi dongles and a usb lan dongle, and run lime-config again
Please share your experience
Regards
Hello,
I had to conduct an analysis on blockchain technology and realize that
it is disruptive and could be a way to conduct ICO (initial coin
offering) campaigns.
This makes me think about a way to find a solution to provide "bank
service" on mesh networks and find fundings and contributors to help
LibreMesh technology to spread...
I am submitting my thoughts on this mailing list to discuss about.
Whith all my caring
Open Source must Win!!
Fred
ICO Example Ethereum ICO aiming AirBnB
http://LockChain.co