Re: [lime-users] Libremesh with authentication on mesh

Hi,   I only joined the list today so apologies if I’m bringing up old news ;-)   In response to this thresd, yes I was able to cook several firmwares for the gl-ap150 with different profiles. I wasn’t able to cook anything for any of the raspberry pi variants   I’ve been trying to get a pi2 lime default firmware that includes kmod-rtl8192cu but chef just returns “requested image is too big for requested target. retry with less packages”  and a link to the Build log <https://ledeupdate.planetexpress.cc/static/faillogs/65571141b31a.log>:   If anyone’s interested, here are a couple of the latest build logs: https://ledeupdate.planetexpress.cc/static/faillogs/65571141b31a.log https://ledeupdate.planetexpress.cc/static/faillogs/a12757de64ed.log   No matter which image I try from the repo, my pi2 always hangs on the rainbow screen …..   With a little bit of url snipping I went to https://ledeupdate.planetexpress.cc/static/ and then drilled down to https://ledeupdate.planetexpress.cc/static/lime/17.06/brcm2708/bcm2709/rpi-… where I found some recent sd card images, including one in which the manifest lists kmod-rtl8192cu.   Celebrations have been shortlived L, my pi2 once again is hanging on the rainbow screen …..   I guess my next option is to try and build it locally, which I’ll look at tonight.   Is there a forum or somewhere I can usefully put my results and perhaps catch up on the good work being done by others? If the pi target builds are broken will my pottering provide useful info for other noobs? (note, I’ll still be doing the pottering whether or not there is somewhere to plonk the results).   Thanks   David *From:*lime-users [mailto:lime-users-bounces@lists.libremesh.org] *On Behalf Of *bruno vianna *Sent:* 13 November 2017 18:00 *To:* libremesh users &lt;lime-users(a)lists.libremesh.org&gt; *Subject:* Re: [lime-users] Libremesh with authentication on mesh   I just wanted to confirm-- is anyone able to cook a firmware in the new chef (https://chef.libremesh.org/) choosing a community network profile? I get hung forever on "building image". Thanks Bruno