30 Dec
2020
30 Dec
'20
7:37 p.m.
On Wed, Dec 30, 2020 at 07:21:51PM +0100, Juergen Kimmel wrote:
LiMe master development (master rev. d4b8732
20201210_2003) / LuCI
openwrt-19.07 branch git-20.341.57626-51f55b5
This happens sometimes when accessing the nodes webui (only one node of
three)
[13503.728170] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[13503.733970] mt76x2e 0000:01:00.0: Build: 1
[13503.738240] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[13503.751667] mt76x2e 0000:01:00.0: Firmware running!
[13503.757335] ieee80211 phy0: Hardware restart was requested
[13505.411576] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[13505.417290] mt76x2e 0000:01:00.0: Build: 1
[13505.421569] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[13505.435799] mt76x2e 0000:01:00.0: Firmware running!
[13505.442058] ieee80211 phy0: Hardware restart was requested
I've experienced similar issues when using MT7612E mPCIe module on
a base-board which doesn't supply enough power to the chip.
Given that the APE522II I had to play with also broke with some
burned part on the board after a short time I'd consider this being
potentially a hardware issue :(
--
Regards
Juergen
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users