18 Nov
2016
18 Nov
'16
3:50 p.m.
2016-11-18 16:21 GMT+01:00 fred <support(a)qo-op.com>om>:
Le 18/11/2016 à 11:12, fred a écrit :
> I have 2 BULLET 2HP to join my Mesh.
> I could install LiMe (chef cooked firmware) on my M2, but it missing
> memory for being available on 2HP..
Ubiquiti Bullet 2HP (and non M models) are not supported by OpenWrt
anymore. They were until OpenWrt 14.07.
So... Well... I don't know...
The lime-build script can produce mini images [1] under 4MB (Chef
still can't) but up to now there's no image for Ubiquiti Bullet 2HP
(which anyway has a small RAM memory which could cause problems).
I suppose is possible but I'm not sure it's going to work anyway...
> Anyone knows if I could try another qMp or
OpenWRT? Could it be
> compatible with LiMe mesh? Otherwise I could use them as mesh end AP...
You can make OpenWrt compatible with LibreMesh simply installing the
LibreMesh packages.
Actually LibreMesh is just a cleaned up OpenWrt image with
pre-installed LibreMesh packages (and their dependencies, like routing
protocols) :D
For example the packages for the ar71xx architecture (which is not the
one of Bullet 2HP) can be downloaded from the downloads.libremesh.org
server [2].
[1] http://downloads.libremesh.org/community_chaos/16.07/ar71xx-mini/basic/
[2] http://downloads.libremesh.org/community_chaos/16.07/ar71xx/generic/package…