Re: [lime-users] 802.11s config

I'll try to setup a testbed for testing 802.11s at my place and let you know the results. In any case, it would be better if you can use the last pre-release for libremesh: http://repo.libremesh.org/lime-17.04 Cheers. On 20/04/17 20:04, Ruairi Hickey wrote: > On Thursday 20 April 2017 11:34:09 IST you wrote: >> On 19/04/17 20:46, Ruairi Hickey wrote: >>> On Wednesday 19 April 2017 19:29:59 IST Ilario Gelmetti wrote: >>>> On 04/19/2017 05:25 PM, Ruairi Hickey wrote: >>>>> While the mesh appears to be up and the stations can see each other >>>>> there is no ip connectivity - if a client is connected to the >>>>> libremesh.org >>>>> via AP node d9:18:6e it can not connect to the internet / outside >>>>> via >>>>> AP >>>>> d9:44:80. >>>> >>>> Hi Ruairi! >>>> Have you plugged an internet connection to a WAN port of your router? >>>> If your router doesn't have a WAN port you will have to configure >>>> another one as WAN (check out /etc/config/lime-example and >>>> http://libremesh.org/docs/changing_network_behavior.html ). >>>> If this doesn't work: can you post the content of /etc/config/network >>>> on >>>> your LibreMesh router? >>>> And the output of the "ip address show" commend. >>>> >>>>> Are there additional steps required to enable this (it works >>>>> out of the box on ad- hoc) ? >>>> >>>> No, it should automagically work when you plug the WAN port of the >>>> LiMe >>>> router into a LAN port of a router offering a DHCP server and a >>>> gateway >>>> to the internet. >>>> Let us know! >>>> Ilario >>> >>> Hi Ilario, >>> >>> The WAN port is connected to the switch and if that is the only >>> router in >>> >>> up / or if I connect to that when connecting to SSID libremesh.org I >>> can >>> connect to the internet. >>> >>> If I connect to either of the other 2 nodes I cannot connect to >>> the >>> >>> Internet... >> >> The link layer seems to work fine in your setup, so the problem is >> proably in the mac or ip layer. Please, run the next test and attach >> the >> output: >> >> Run "bmx6 -c originators" to see all nodes in the network. >> >> Run "bmx6 -c links" to see the one-hop nodes >> >> Run "batctl o" to see the layer2 nodes >> >> Run "bmx6 -cp" on the node with Internet connection to see if the tunIn >> for sharing Internet is enabled (inet4). >> >> Cheers. >> >>> I've attached 2 text files (one for each router with the file >>> contents) >>> router connected to switch (WAN port) / Internet >>> router-d94040.txt >>> >>> router in mesh >>> router-d94480.txt >>> >>> Thanks, >>> >>> Ruairi >>> >>> (if the attachments get stripped I'll resend with the contents >>> inline..) >>> >>> >>> >>> _______________________________________________ >>> lime-users mailing list >>> lime-users(a)lists.libremesh.org >>> https://lists.libremesh.org/mailman/listinfo/lime-users > > Hi, > > If it would be of assistance I can give you ssh access to the router > ... I > > have it behind a static IP, just need to open up the firewall. > > Ruairi