28 Mar
2017
28 Mar
'17
5:08 p.m.
On 28/03/17 18:54, Ilario Gelmetti wrote:
On 03/28/2017 06:41 PM, James Lewis wrote:
>>> On 28/03/17 16:13, James Lewis wrote:
>>>> Now the quesiton is: how do we set one of the mesh devices to _take_
>>>> DHCP through the LAN port rather than give it, and to be the
'gateway'
>>>> device on the mesh network, and then what will happen with devices
>>>> that subsequently connect to the mesh? How will they get their gateway
>>>> set?
>>
>> There are two ways in your case:
>> * configuring LibreMesh for using that ethernet port as WAN (as Pau is
>> going to write in the web);
>
> Great, this is what we thought and tried, but perhaps got something wrong
> somewhere as it didn't work. Look forward to Pau's docs.
Let's see if it helps you understand how it works.
http://libremesh.org/docs/changing_network_behavior.html
Feel free to make comments and/or send modifications via pull-request.
We are working on the LiMe Web interface and soon this kind of
configuration will be available via Web, but for the moment it is only
possible via shell.
Did you modify just the /etc/config/lime* files or
also the others?
I have no idea if this can be done also via the web-ui (I don't think so).
Ah ok! So it's a Ubiquiti NanoStation M2 LoCo
I think the eth1 controller exist but the physical port is just not
attached.
*
otherwise just plugging the cable from the gateway device into the
secondary port of Nanostation M2 (your model has 2 ethernet ports,
right?)
No, I have the little M2 which only has one ethernet port. I do have eth0 and eth1 interfaces though
For the LoCo XM model (as well for other models with just 1 ethernet
port) the "bullet" image should be used [1]. For XW hardware with one
ethernet port (also stuff like newest AirGrid models) there's a
"loco-m-xw" image.
If you see two ethernet could be because you used the "nano" image.
I suppose that there's no problem of having an unused eth1...?
Ciao!
Ilario
[1] https://wiki.openwrt.org/toh/ubiquiti/airmaxm
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u