28 Mar
2017
28 Mar
'17
2:44 p.m.
Do not apologize for making such a questions. It is actually a pity that
something as basic as what you want to do is not clear for the end user.
That is a clear example that we need to put more efforts on
documentation. Please give me few minutes to answer properly to your
question, but instead of writing it in the ML I'll make a new webpage
entry so others might use it.
On 28/03/17 16:13, James Lewis wrote:
Hi all,
Thanks for previous help getting nanostation M2 working. It worked
great downgrading first to AirOS 5.5.11 then installing the nano
factory firmware.
I have two M2's, and they have automatically meshed and we can connect
two devices to their ethernet ports, the devices both get IP address
and we can ping between the connected devices! All good! (Except there
is no gateway IP issued - is that expected?)
Now the quesiton is: how do we set one of the mesh devices to _take_
DHCP through the LAN port rather than give it, and to be the 'gateway'
device on the mesh network, and then what will happen with devices
that subsequently connect to the mesh? How will they get their gateway
set?
Thanks for help! Sorry if this is a bit of a newb question, it's not
immediately clear from the configuration docs, any rtfm answer
pointing to speciifc documentation also appreciated.
James
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u