Re: [lime-users] 802.11s config

On 10/05/17 15:19, Ruairi Hickey wrote: I've not tested lime-build with LEDE cause the idea is to use lime-sdk instead. You can clone lime-sdk (use Master branch) and execute: ./cooker -d ar71xx/generic ./cooker -f Then navigate to 17.01.1/ar71xx/generic/sdk, and copy the patch files. Compile: ./cooker -b ar71xx/generic Generate firmware ./cooker -c ar71xx/generic --flavor=lime_mini --profile=tl-wr841n-v1 # check correct profile name with ./cooker --profiles=ar71xx/generic # if you don't care about having LuCi use lime_zero as flavor instead Cheers. > On Tuesday 9 May 2017 16:41:29 IST Daniel Golle wrote: >> Hi Pau, >> >> sorry for the late reply. See my comment below. >> >> On Fri, May 05, 2017 at 03:21:36PM +0200, Pau wrote: >>> Hi Again. >>> >>> I've been testing 802.11s support on LibreMesh develop branch. These are >>> the conclusions: >>> >>> 1) I fixed a bug related to the network configuration: >>> >>> https://github.com/libremesh/lime-packages/commit/3163e6ed15079e2c760824 >>> c6 >>> d1f81837345e2093 >>> >>> This is already comited and soon the binaries available on >>> http://repo.libremesh.org will have this patch applied (the compilation >>> process is already running). >>> >>> 2) Good news are that I managed to create a mesh network using 802.11s. >>> In addition to `mode ieee80211s` also `proto ieee80211s` must be enabled >>> in the configuration file. >>> >>> This is my /etc/config/lime >>> >>> config lime network >>> >>> list protocols ieee80211s >>> list protocols lan >>> list protocols anygw >>> list protocols batadv:%N1 >>> list protocols bmx6:13 >>> >>> config lime wifi >>> >>> list modes ieee80211s >>> >>> Then run: lime-config && lime-apply >>> >>> This configuration works for me and the two routers are connected. >>> >>> 3) Bad news is that, for some point I don't understand, if "AP" is >>> enabled in addition to 80211s, the mesh point is not enabled and it does >>> not work. >>> >>> So the right configuration (to mesh and AP at same time) would be: >>> >>> config lime wifi >>> >>> list modes ieee80211s >>> list modes ap >>> list modes apname >>> >>> But it does not work. >>> >>> According to "iw list" information, Mesh point + AP is possible, but I >>> think there is something wrong on LEDE. So I'll investigate a bit more >>> and talk with LEDE developers if it is an actual LEDE bug. >>> >>> PS: add Daniel as CC, maybe he can add some extra information for the >>> resolution of this problem. >> >> I've been in touch with neoraider and he made a fix for this: >> https://git.lede-project.org/?p=lede/neoraider/staging.git;a=commit;h=6db >> 7dc d74aaf23865ff19b515daf8c534414adaf >> >> I also updated the ticket on github, just in case you missed that. >> >> >> Cheers >> >> >> Daniel >> >>> On 20/04/17 20:04, Ruairi Hickey wrote: >>>> On Thursday 20 April 2017 11:34:09 IST you wrote: >>>>> On 19/04/17 20:46, Ruairi Hickey wrote: >>>>>> On Wednesday 19 April 2017 19:29:59 IST Ilario Gelmetti wrote: >>>>>>> On 04/19/2017 05:25 PM, Ruairi Hickey wrote: >>>>>>>> While the mesh appears to be up and the stations can see each other >>>>>>>> there is no ip connectivity - if a client is connected to the >>>>>>>> libremesh.org >>>>>>>> via AP node d9:18:6e it can not connect to the internet / outside >>>>>>>> via AP >>>>>>>> d9:44:80. >>>>>>> >>>>>>> Hi Ruairi! >>>>>>> Have you plugged an internet connection to a WAN port of your >>>>>>> router? >>>>>>> If your router doesn't have a WAN port you will have to configure >>>>>>> another one as WAN (check out /etc/config/lime-example and >>>>>>> http://libremesh.org/docs/changing_network_behavior.html ). >>>>>>> If this doesn't work: can you post the content of >>>>>>> /etc/config/network >>>>>>> on >>>>>>> your LibreMesh router? >>>>>>> And the output of the "ip address show" commend. >>>>>>> >>>>>>>> Are there additional steps required to enable this (it works >>>>>>>> out of the box on ad- hoc) ? >>>>>>> >>>>>>> No, it should automagically work when you plug the WAN port of the >>>>>>> LiMe >>>>>>> router into a LAN port of a router offering a DHCP server and a >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> lime-users mailing list >>>>>>> lime-users(a)lists.libremesh.org >>>>>>> https://lists.libremesh.org/mailman/listinfo/lime-users