8 Mar
2019
8 Mar
'19
5:25 a.m.
Fred
Look here for details on which Wifi Adapters to use and a CJDNS/Mesh build
https://github.com/tomeshnet/prototype-cjdns-pi
https://github.com/phillymesh/802.11s-adapters/blob/master/README.md
Regards
On Thu, Mar 7, 2019 at 11:12 PM Daniel Golle <daniel(a)makrotopia.org> wrote:
Hi Fred,
On Thu, Mar 07, 2019 at 10:02:19PM +0100, fred wrote:
Hi,
Do you have a recommended chef firmware build and prefered USB wifi
dongle to wire on a RPI Zero W
https://hackaday.com/2015/11/28/first-raspberry-pi-zero-hack-piggy-back-wif…
Then it could be a cheap and neat LibreMesh node whith 2 wlan interfaces
?!
USB WiFi is not what you may expect from a mesh router, especially not
if you got two of them and your Ethernet-port also being a USB device
on the same bus...
This may work for simple station mode or APs serving only very few
stations, but for 802.11s/mesh, Ad-Hoc or busy vAPs USB just isn't
good enough.
Cheers
Daniel
Soyons Libre!
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users