6 Nov
2018
6 Nov
'18
4:32 p.m.
I've looked at librerouter, but it's 802.11bgn onboard and it looks
like it will ship with 'n radios in the mPCIe slots. I could live
with the onboard radio handling the local WiFi and the 2 add-in radios
doing the mesh *but* it's really got to be 'ac wireless. I feel like
when it arrives it will be 5 years out of date.
is ath10k generally fine just doesn't work properly for AP+mesh or is
it to be avoided entirely?
I've got 'n and 'ac wireless deployments and 'ac offers a lot more
than just maximum throughput. No interest in an 802.11n mesh.
The point of the UAP-AC-M unit is price:performance. A $99 radio that
comes with mounting hardware and power injector AND already runs
openwrt (i've loaded it myself) makes for an inexpensive mesh node.
at oldwiki.archive.openwrt.org/inbox/ubiquiti/ubiquiti_uap-ac-mesh_3.7.xx.xxxx
which suggests that this unit will work with libremesh, I was just
hoping to hear from someone who's tried it.
Down the road, I'm going to want to utilize 'ac wave2 radios with 4x4
or more (antenna and price dependant) for 'super nodes' and an
inexpensive single/dual radio for leaf nodes.
On Sat, Nov 3, 2018 at 10:08 AM Nicolas Pace <nico(a)libre.ws> wrote:
On 2018-11-01 1:00 a.m., dan wrote:
a) I'm new here, be gentle
hi, welcome!
b) Anyone got libremesh running on the UAP-AC-M or Mesh Pro units?
What is most interesting is that they are dual radio, passive poe
powered, and outdoor ready. The M has 1 ethernet, the Mesh Pro has
dual with PoE passthrough. I'm not seeing it listed in the image or
the builder, hoping someone has done the basics here.
no... that is why the librerouter is important!
c) Anyone have some examples of an in-production mesh with 2.4 + 5Ghz radios?
we use TP-link wdr-3500/3600/4300
my design concept is that libremesh would be the
backbone network
using both radios for mesh.
Good idea
It would offer outdoor hotspot style WiFi
off the 2.4Ghz, and the wired interface would run down into the
customer's hom
and be their connection through a PoE injector.
I'm hoping that even over 3-4 mesh hops I could deliver a reliable
5Mbps service with the UAP-AC-M.
those devices are ath10k, meaning don't work correctly with AP+mesh
If a customer wanted to upgrade to a faster plan
I would swap the
UAP-AC-M with a UAP-AC-Mesh Pro and add a PtP from a tower (I'm a
wISP) plugged into the Mesh Pro's second ethernet port and I would
bridge that to a VLAN on the PtP radio to essentially trunk the mesh
back to the tower.
no idea about customers... libremesh not thought for a customer network
Regards.
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users