Digging just a bit deeper there is no automagically libremesh configuration
at all.
Only three interfaces created (lan, wan, wan6)
Juergen Kimmel <juergenkimmel(a)gmail.com> schrieb am Sa., 8. Apr. 2017 um
02:33 Uhr:
Status overview reports wlano-adhoc nodes but no mesh
nodes
Juergen Kimmel <juergenkimmel(a)gmail.com> schrieb am Sa., 8. Apr. 2017 um
02:24 Uhr:
There is no channel assigned to the meshing radio1
Juergen Kimmel <juergenkimmel(a)gmail.com> schrieb am Fr., 7. Apr. 2017 um
06:28 Uhr:
edit:
"the clients of *gateway *nodes don't get internet ( no ping response)
even after having changed wan proto to dhcp. So wan connects to the
internet router"
Having read that adhoc does not work properly in mt7620 I changed to
802.11s but here is no meshing.
I changed lan interface static address to avoid problems with my lan
(192.168.1.0) but nevertheless the gateway node tangles my lan makes it
slow if not unusable.
Juergen Kimmel <juergenkimmel(a)gmail.com> schrieb am Fr., 7. Apr. 2017 um
05:26 Uhr:
Thankk you again Pau,
I used the option precompiled binaries.
Here I got stuck that the clients don't get internet despite the fact that
network diagnostics on the node runs fine.
Regards
Pau <pau(a)dabax.net> schrieb am Do., 6. Apr. 2017 um 17:32 Uhr:
On 06/04/17 17:20, Juergen Kimmel wrote:
Many thanks Pau,
but 'I need further instructons.
I cloned lime-sdk and lede-sdk and downloaded
lede-imagebuilder-ramips-mt7620.Linux-x86_64 so I have three folders.
Whats next?
I think you misunderstood me. The lime-sdk makes everything for you, you
don't actually need to manually download anything else than lime-sdk.
The comments (starting with # in my previous mail) where to explain what
is the command doing.
Here the clean list of commands you might execute to compile for target
ramips/mt7620.
git clone
https://github.com/libremesh/lime-sdk
cd lime-sdk
./cooker --profiles=ramips/mt7620
# Find the name of your hardware profile on this list
./cooker -c ramips/mt7620 --flavor=lime_default --profile=YOUR_PROFILE
That is all, once it finishes you'll find the firmware in the output/
directory.
Please, run "git pull" if you are not cloning a new lime-sdk but using
and old cloned one.
Also, I just implemented support for --remote so you don't need to
compile the SDK (all libremesh packages will be also downloaded instead
of localy compiled).
For using such feature, execute the cooker like this:
./cooker -c ramips/mt7620 --remote --flavor=lime_default
--profile=YOUR_PROFILE
Lastly, you can also use the current precompiled (using the cooker)
binaries at
http://repo.libremesh.org (not yet official).
Cheers.
2017-04-06 12:40 GMT+01:00 Pau
<pau(a)dabax.net>et>:
Hi Jurgen.
I've been working on a new tool to build firmwares. Instead of using
standard buildroot it uses the LEDE SDK and ImageBuilder. It means less
compilation time (and problems) and better integration with official
LEDE releases.
To use it:
git clone
https://github.com/libremesh/lime-sdk
# Download SDK and IB from LEDE
./cooker -d ar71xx/generic
# List the hardware profiles and find your own
./cooker --profiles=ar71xx/generic
# Cook the firmware for your profile using lime_default flavor
./cooker -c ar71xx/generic --flavor=lime_default --profile=tl-wdr3500-v1
The current master branch points to LEDE 17.01.0. If you want to use the
snapshot branch of LEDE checkout "development" branch of lime-sdk.
This is a new tool, I'm still working on it. Please, let me know if you
have problems.
Cheers.
On 06/04/17 10:41, Juergen Kimmel wrote:
I am pretty inexperienced in compiling
I have managed to compile the master branch but not 17.02
"git clone -b 17.02 git: //github.com/libremesh/lime-build"
and
"make T = mt7620 V = s"
led to the error
"rule for checkout failed (makefile line 168)"
where is the problem?
Tx
Jürgen Kimmel
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users