9 Nov
2020
9 Nov
'20
2:45 p.m.
Hi SAn,
Am Mo., 9. Nov. 2020 um 14:25 Uhr schrieb Daniel Golle <
daniel(a)makrotopia.org>gt;:
On Mon, Nov 09, 2020 at 02:11:00PM +0100, Andy Schopf
wrote:
I am not aware of starting babeld with sccomp (I don't know what this is...
;-) )
Hi SAn,
you are right. babeld is not started. I hav to start it manually in
/etc/init.d
with
./babeld trace
then I get an IP address.
This is strangely *not *working in the LuCI-Interface -> startup: with
restart or start/stop (no output in logread)
with the manual method above I get following:
Mon Nov 9 09:33:55 2020 daemon.warn procd: Seccomp support for
babeld::instance1 not available
Are you trying to start babled with seccomp (or seccomp-tracing)
support? I don't see any seccomp filter defined for babled
in
openwrt-routing/packages repo...?
Nope this is a Rampis mt7620 device.
Mon Nov 9 09:33:55 2020 daemon.err babeld[4253]:
Warning: couldn't
determine channel of interface wlan0-mesh_17.
Mon Nov 9 09:33:55 2020 daemon.err babeld[4253]: Warning: couldn't
determine channel of interface eth0_17.
Mon Nov 9 09:34:00 2020 cron.err crond[1330]: USER root pid 4288 cmd
((sleep $(($RANDOM % 30));
/etc/shared-state/publishers/shared-state-publish_vouchers &&
shared-state
sync pirania &> /dev/null)&)
Mon Nov 9 09:34:00 2020 cron.err crond[1330]: USER root pid 4289 cmd
((for
dataFile in /var/shared-state/data/* ; do
shared-state bleach $(basename
$dataFile .json); done &> /dev/null)&)
And every reboot no babeld :-(
A Problem of the openwrt snapshot maybe? (Build is from today)
I assume this is ath79/generic?
And which exact commit are you using?
where do I find this Information?
This is what I see on login:
OpenWrt SNAPSHOT, r14877-e267445510
I can try to reproduce your problem on x86/64 in QEMU...
Thank you! :-D
Regards
Andy
Am So., 8. Nov. 2020 um 01:48 Uhr schrieb SAn <spiccinini(a)altermundi.net
:
> Hi Andy, it seems that babeld Is not running or not working properly.
> Check that it is running in all the nodes.
>
> Best
> SAn
>
> On November 6, 2020 10:38:25 AM GMT-03:00, Andy Schopf <
> andymcschopf(a)gmail.com> wrote:
> >Hi all,
> >
> >I have since a few days the Problem, that my mesh nodes get any ipv4
> >addresses.
> >So connected to the mesh node there is no way to the internet. Only on
> >the
> >Gateway Nodes. There I see only ipv6 addresses in direction to the
mesh
> >nodes. on the nodes the lime app shows
no DNS and no ipv4/ipv6.
> >Any suggestions?
> >
> >Regards,
> >Andy
>
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users