19 Apr
2017
19 Apr
'17
6:46 p.m.
On Wednesday 19 April 2017 19:29:59 IST Ilario Gelmetti wrote:
On 04/19/2017 05:25 PM, Ruairi Hickey wrote:
Hi Ilario,
The WAN port is connected to the switch and if that is the only router in
up / or if I connect to that when connecting to SSID libremesh.org I can
connect to the internet.
If I connect to either of the other 2 nodes I cannot connect to the
Internet...
I've attached 2 text files (one for each router with the file contents)
router connected to switch (WAN port) / Internet
router-d94040.txt
router in mesh
router-d94480.txt
Thanks,
Ruairi
(if the attachments get stripped I'll resend with the contents inline..)
While the mesh appears to be up and the stations
can see each other
there is no ip connectivity - if a client is connected to the
libremesh.org
via AP node d9:18:6e it can not connect to the internet / outside via AP
d9:44:80.
Hi Ruairi!
Have you plugged an internet connection to a WAN port of your router?
If your router doesn't have a WAN port you will have to configure
another one as WAN (check out /etc/config/lime-example and
http://libremesh.org/docs/changing_network_behavior.html ).
If this doesn't work: can you post the content of /etc/config/network on
your LibreMesh router?
And the output of the "ip address show" commend.
Are there additional steps required to enable
this (it works
out of the box on ad- hoc) ?
No, it should automagically work when you plug the WAN port of the LiMe
router into a LAN port of a router offering a DHCP server and a gateway
to the internet.
Let us know!
Ilario