20 Jun
2018
20 Jun
'18
7:10 a.m.
It is stored in communities git repository ;)
https://github.com/libremesh/network-profiles/tree/master/canmasdeu/bridge
Cheers!
On Wednesday, 20 June 2018 01:19:20 CEST Brian Russell wrote:
gio prepared a configuration for us specific to the
wr841N that we are
using very successfully on 9 machines in can masdeu (a community in
Barcelona) which removed batman, bmx6, ad-hoc, and other components, and
would do the trick - if you are connecting the routers via LAN cable. I am
very happy with it, you can download the image here:
https://mega.nz/#!BWZE2CrB!BC-ic0mUM4UTXwP-zmxjdnEF-Hli5zUIJ0V-dDcmm-g
unfortunately I don't remember where the configuration files were stored,
on github or someplace else... gio?
here is the configuration of /etc/config/lime, for what it's worth:
config lime
'system'
option hostname
'cmd-capilla'
option domain
'lan'
config lime
'network'
option primary_interface
'eth0'
list resolvers
'4.2.2.2'
list resolvers
'141.1.1.1'
list resolvers
'2001:470:20::2'
list protocols
'lan'
option main_ipv4_address '10.13.0.0/16'
option main_ipv6_address
'2a00:1508:0a%M4:%M600::/64'
config lime
'wifi'
list modes
'ap'
option ap_ssid
'CanMasdeu'
option distance
'1000'
option htmode_5ghz
'HT40'
option channel_2ghz
'11'
option channel_5ghz
'48'
~
On Tue, Jun 19, 2018 at 3:06 AM, <modante(a)disroot.org> wrote:
> Once time ago I used a router with libremesh only for mesh and wired to
> another acting like AP.
> I think is not a problem to remove the AP and apname.
> Regards :-)
>
> 15 de junio de 2018 17:26, "fauno" <fauno(a)endefensadelsl.org>
escribió:
> > hi! we just installed lime_mini into our tplink wr841n v11 nodes, but
> > we're a bit confused about the setup. it created three wifi on radio0,
> > one is a mesh point and the two others are ap. but when we tried to
> > disable the aps, the mesh wifi stopped working.
> >
> > first we disabled the config for the ap wifis on /etc/config/wireless
> > and after `wifi off` and `wifi on`, the mesh point would be recreated
> > but without an ssid. later we removed the 'ap' y 'apname'
from
> > /etc/config/lime and ran `lime-config`, which did the same we did
> > manually, with the same results.
> >
> > what would be the config for just running mesh points? :D
> >
> > --
> > }(:=
> >
> > _______________________________________________
> > lime-users mailing list
> > lime-users(a)lists.libremesh.org
> > https://lists.libremesh.org/mailman/listinfo/lime-users
>
> _______________________________________________
> lime-users mailing list
> lime-users(a)lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-users