On 11/7/18 6:43 PM, faracigiuseppe wrote:
I have compiled the firmware for the picostation 2hp
with the default
options, but I can not get it to connect to the libremesh nodes that I
already have working. Is there anyone who can help me ? I put here the
control files
https://mega.nz/#F!4f40TYBL!RL7zeIW4SwTV3_nERtsREQ
From wlan0meshstationdump.txt seems that the mesh (IEEE802.11s)
connection with the other two nodes is established.
Both BATMAN adv and BMX6 are active on the mesh interface (batctl-if.txt
nd bmx6.txt).
But neither BATMAN adv (batctl-o.txt) nor BMX6 (bmx6.txt) can see the
other nodes.
In dmesg there's some message regarding a VLAN 10 which is not being
used in LibreMesh but it is used in Giuseppe's home network, no idea why
BATMAN complains about this.
I don't understand where the problem is.
Anyone have idea if we miss any piece of information?