27 Oct
2020
27 Oct
'20
8:25 p.m.
Hi!
On 10/27/20 5:14 PM, Daniel Golle wrote:
On Mon, Oct 26, 2020 at 12:07:24PM +0100, Juergen
Kimmel wrote:
AFAIK we recommend in the docs to use the package lime-hwd-openwrt-wan that selects
lime-proto-wan.
This package provides the NATing rules without the need of the firewall package.
Daniel maybe you are not using lime-proto-wan in your deploys? Juergen do you have the
lime-proto-wan selected?
Maybe the automatic selection that is donde by lime-hwd-openwrt-wan is not working in this
device?
Best!
SAn
I learned from the config.buildinfo that
firewall has not been selected
The settings of the switches are identical.
May disabling the firewall have been the culprit?
I flashed the same device again there is no error and client has internet.
Ah, of course, without any firewall installed there is also no
NAT / masquerading happening, so if you want that, you do need
something to configure that (such as OpenWrt's 'firewall' package').