26 May
2015
26 May
'15
8:47 a.m.
Hi all,
2015-05-26 5:15 GMT+02:00 Ciaby <ciaby(a)autistici.org>rg>:
On 05/25/2015 12:02 PM, Ciaby wrote:
> Gui wrote:
>> you can flash that, and then change /etc/config/lime-defaults
the correct file to modify is
/etc/config/lime
and not
/etc/config/lime-defaults
Modifying the file lime-defaults should have no effect when running lime-config.
I think that lime-defaults file is useless and we should remove it
from lime-system.
> I assume that the /etc/config/lime file is not
working as expected... :)
Which file are you modifying? lime or lime-defaults?
Ok, I just followed your instructions, flashed the new
firmware and
erased the old config. Ssh-ed in, modified /etc/config/lime-defaults,
run lime-config, and... it doesn't work ;)
Yep, lime-defaults is ignored by lime-config
So, the image you linked works, but it's
configured for Delta Libre
and lime-config doesn't do his job. Building a firmware from git only
makes things worse...
Worse... maybe... anyway you could try following this guide for
compiling your own image (without using lime-build):
[ENG] http://libre-mesh.org/projects/libre-mesh/wiki/Compile_Manually
[ITA] http://wiki.ninux.org/Libre-Mesh
Ciao!
Ilario