24 May
2017
24 May
'17
1:43 a.m.
Here come the data:
login as: root
root(a)10.13.0.1's password:
BusyBox v1.25.1 () built-in shell (ash)
_________
/ /\ _ ___ ___ ___
/ LE / \ | | | __| \| __|
/ DE / \ | |__| _|| |) | _|
/________/ LE \ |____|___|___/|___|
lede-project.org
\ \ DE /
\ LE \ /
-----------------------------------------------------------
\ DE \ / Reboot (17.01.1, r3316-7eb58cf109)
\________\/
-----------------------------------------------------------
___ __ __ _______ __
| |_|__| |--.----.-----.| | |-----.-----| |--.
| | | _ | _| -__|| | -__|__ --| |
|_____|__|_____|__| |_____||__|_|__|_____|_____|__|__|
------------------------------------------------------
LiMe 0.0 development (develop rev.6ded289 20170522_1204)
------------------------------------------------------
http://libremesh.org
------------------------------------------------------
=== System Notes =====================================
======================================================
root@LiMe-16d9e8:~# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state
UNKNOWN mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
3: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group
default qlen 1
link/tunnel6 :: brd ::
4: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bat0
state UNKNOWN mode DEFAULT group default qlen 1000
link/ether aa:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
7: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
8: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
9: anygw@br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UNKNOWN mode DEFAULT group default qlen 1
link/ether aa:aa:aa:0d:fe:aa brd ff:ff:ff:ff:ff:ff
10: eth0-1_13(a)eth0.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398 qdisc
noqueue state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
11: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
12: eth0-2_13(a)eth0.2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398 qdisc
noqueue state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
13: eth0-2_29(a)eth0.2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue master bat0 state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
14: eth0_13@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
15: bat0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
br-lan state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 16:f1:88:98:5f:0b brd ff:ff:ff:ff:ff:ff
16: bmxmain@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1452 qdisc noqueue
state UNKNOWN mode DEFAULT group default qlen 1
link/tunnel6 fd66:66:66:a:7aa3:51ff:fe16:d9e8 peer
fd66:66:66:ff00:7aa3:51ff:fe16:d9e8
17: wlan1-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1536 qdisc mq state
UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
18: wlan0-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1536 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
19: wlan1-ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
br-lan state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
20: wlan0-ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 7a:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
21: wlan0-apname: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 7e:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
22: wlan1-apname: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq
master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:ea brd ff:ff:ff:ff:ff:ff
23: wlan1-mesh_13@wlan1-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398
qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
24: wlan1-mesh_29@wlan1-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1532
qdisc noqueue master bat0 state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
25: wlan0-mesh_13@wlan0-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398
qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
26: wlan0-mesh_29@wlan0-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1532
qdisc noqueue master bat0 state UP mode DEFAULT group default qlen 1000
link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
27: bmxC4main: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc
fq_codel state UNKNOWN mode DEFAULT group default qlen 500
link/none
28: bmxC6main: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc
fq_codel state UNKNOWN mode DEFAULT group default qlen 500
link/none
root@LiMe-16d9e8:~# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.lan=interface
network.lan.type='bridge'
network.lan.proto='static'
network.lan.ip6assign='60'
network.lan.ip6addr='2a00:1508:a0d:fe00::16:d9e8/64'
network.lan.ipaddr='10.13.217.232'
network.lan.netmask='255.255.0.0'
network.lan.mtu='1500'
network.lan.ifname='bat0' 'eth0.1'
network.lan_dev=device
network.lan_dev.name='eth0.1'
network.lan_dev.macaddr='78:a3:51:16:d9:e8'
network.wan=interface
network.wan.ifname='eth0.2'
network.wan.proto='dhcp'
network.wan_dev=device
network.wan_dev.name='eth0.2'
network.wan_dev.macaddr='78:a3:51:16:d9:e9'
network.wan6=interface
network.wan6.ifname='eth0.2'
network.wan6.proto='none'
network.@switch[0]=switch
network.(a)switch[0].name='switch0'
network.(a)switch[0].reset='1'
network.(a)switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.(a)switch_vlan[0].device='switch0'
network.(a)switch_vlan[0].vlan='1'
network.(a)switch_vlan[0].ports='0 1 2 3 6t'
network.@switch_vlan[1]=switch_vlan
network.(a)switch_vlan[1].device='switch0'
network.(a)switch_vlan[1].vlan='2'
network.(a)switch_vlan[1].ports='4 6t'
network.lm_net_br_lan_anygw_dev=device
network.lm_net_br_lan_anygw_dev.type='macvlan'
network.lm_net_br_lan_anygw_dev.name='anygw'
network.lm_net_br_lan_anygw_dev.ifname='br-lan'
network.lm_net_br_lan_anygw_dev.macaddr='aa:aa:aa:0d:fe:aa'
network.lm_net_br_lan_anygw_if=interface
network.lm_net_br_lan_anygw_if.ifname='anygw'
network.lm_net_br_lan_anygw_if.auto='1'
network.lm_net_br_lan_anygw_if.netmask='255.255.0.0'
network.lm_net_br_lan_anygw_if.proto='static'
network.lm_net_br_lan_anygw_if.ipaddr='10.13.0.1'
network.lm_net_br_lan_anygw_if.ip6addr='2a00:1508:a0d:fe00::1/64'
network.lm_net_anygw_rule6=rule6
network.lm_net_anygw_rule6.src='2a00:1508:a0d:fe00::1/128'
network.lm_net_anygw_rule6.lookup='170'
network.lm_net_anygw_route6=route6
network.lm_net_anygw_route6.interface='lm_net_br_lan_anygw_if'
network.lm_net_anygw_route6.target='2a00:1508:a0d:fe00::/64'
network.lm_net_anygw_route6.table='170'
network.lm_net_anygw_rule4=rule
network.lm_net_anygw_rule4.src='10.13.0.1/32'
network.lm_net_anygw_rule4.lookup='170'
network.lm_net_anygw_route4=route
network.lm_net_anygw_route4.interface='lm_net_br_lan_anygw_if'
network.lm_net_anygw_route4.target='10.13.0.0'
network.lm_net_anygw_route4.netmask='255.255.0.0'
network.lm_net_anygw_route4.table='170'
network.lm_net_batadv_dummy_if=interface
network.lm_net_batadv_dummy_if.ifname='dummy0'
network.lm_net_batadv_dummy_if.macaddr='aa:a3:51:16:d9:e8'
network.lm_net_batadv_dummy_if.proto='batadv'
network.lm_net_batadv_dummy_if.mesh='bat0'
network.lm_net_eth0_1_bmx6_dev=device
network.lm_net_eth0_1_bmx6_dev.type='8021ad'
network.lm_net_eth0_1_bmx6_dev.name='eth0-1_13'
network.lm_net_eth0_1_bmx6_dev.ifname='eth0.1'
network.lm_net_eth0_1_bmx6_dev.vid='13'
network.lm_net_eth0_1_bmx6_dev.mtu='1398'
network.lm_net_eth0_1_bmx6_if=interface
network.lm_net_eth0_1_bmx6_if.proto='none'
network.lm_net_eth0_1_bmx6_if.auto='1'
network.lm_net_eth0_1_bmx6_if.ifname='eth0-1_13'
network.lm_net_wlan0_mesh_batadv_dev=device
network.lm_net_wlan0_mesh_batadv_dev.type='8021ad'
network.lm_net_wlan0_mesh_batadv_dev.name='wlan0-mesh_29'
network.lm_net_wlan0_mesh_batadv_dev.ifname='@lm_net_wlan0_mesh'
network.lm_net_wlan0_mesh_batadv_dev.vid='29'
network.lm_net_wlan0_mesh_batadv_dev.mtu='1532'
network.lm_net_wlan0_mesh_batadv_if=interface
network.lm_net_wlan0_mesh_batadv_if.auto='1'
network.lm_net_wlan0_mesh_batadv_if.ifname='wlan0-mesh_29'
network.lm_net_wlan0_mesh_batadv_if.proto='batadv'
network.lm_net_wlan0_mesh_batadv_if.mesh='bat0'
network.lm_net_wlan0_mesh_bmx6_dev=device
network.lm_net_wlan0_mesh_bmx6_dev.type='8021ad'
network.lm_net_wlan0_mesh_bmx6_dev.name='wlan0-mesh_13'
network.lm_net_wlan0_mesh_bmx6_dev.ifname='@lm_net_wlan0_mesh'
network.lm_net_wlan0_mesh_bmx6_dev.vid='13'
network.lm_net_wlan0_mesh_bmx6_dev.mtu='1398'
network.lm_net_wlan0_mesh_bmx6_if=interface
network.lm_net_wlan0_mesh_bmx6_if.auto='1'
network.lm_net_wlan0_mesh_bmx6_if.ifname='wlan0-mesh_13'
network.lm_net_wlan0_mesh_bmx6_if.proto='static'
network.lm_net_wlan0_mesh_bmx6_if.ipaddr='169.254.217.233'
network.lm_net_wlan0_mesh_bmx6_if.netmask='255.255.255.255'
network.lm_net_wlan0_mesh=interface
network.lm_net_wlan0_mesh.proto='none'
network.lm_net_wlan0_mesh.mtu='1536'
network.lm_net_wlan0_mesh.auto='1'
network.lm_net_wlan1_mesh_batadv_dev=device
network.lm_net_wlan1_mesh_batadv_dev.type='8021ad'
network.lm_net_wlan1_mesh_batadv_dev.name='wlan1-mesh_29'
network.lm_net_wlan1_mesh_batadv_dev.ifname='@lm_net_wlan1_mesh'
network.lm_net_wlan1_mesh_batadv_dev.vid='29'
network.lm_net_wlan1_mesh_batadv_dev.mtu='1532'
network.lm_net_wlan1_mesh_batadv_if=interface
network.lm_net_wlan1_mesh_batadv_if.auto='1'
network.lm_net_wlan1_mesh_batadv_if.ifname='wlan1-mesh_29'
network.lm_net_wlan1_mesh_batadv_if.proto='batadv'
network.lm_net_wlan1_mesh_batadv_if.mesh='bat0'
network.lm_net_wlan1_mesh_bmx6_dev=device
network.lm_net_wlan1_mesh_bmx6_dev.type='8021ad'
network.lm_net_wlan1_mesh_bmx6_dev.name='wlan1-mesh_13'
network.lm_net_wlan1_mesh_bmx6_dev.ifname='@lm_net_wlan1_mesh'
network.lm_net_wlan1_mesh_bmx6_dev.vid='13'
network.lm_net_wlan1_mesh_bmx6_dev.mtu='1398'
network.lm_net_wlan1_mesh_bmx6_if=interface
network.lm_net_wlan1_mesh_bmx6_if.auto='1'
network.lm_net_wlan1_mesh_bmx6_if.ifname='wlan1-mesh_13'
network.lm_net_wlan1_mesh_bmx6_if.proto='static'
network.lm_net_wlan1_mesh_bmx6_if.ipaddr='169.254.217.232'
network.lm_net_wlan1_mesh_bmx6_if.netmask='255.255.255.255'
network.lm_net_wlan1_mesh=interface
network.lm_net_wlan1_mesh.proto='none'
network.lm_net_wlan1_mesh.mtu='1536'
network.lm_net_wlan1_mesh.auto='1'
network.lm_net_eth0_bmx6_dev=device
network.lm_net_eth0_bmx6_dev.type='8021ad'
network.lm_net_eth0_bmx6_dev.name='eth0_13'
network.lm_net_eth0_bmx6_dev.ifname='eth0'
network.lm_net_eth0_bmx6_dev.vid='13'
network.lm_net_eth0_bmx6_dev.mtu='1398'
network.lm_net_eth0_bmx6_if=interface
network.lm_net_eth0_bmx6_if.proto='none'
network.lm_net_eth0_bmx6_if.auto='1'
network.lm_net_eth0_bmx6_if.ifname='eth0_13'
network.lm_net_eth0_2_batadv_dev=device
network.lm_net_eth0_2_batadv_dev.type='8021ad'
network.lm_net_eth0_2_batadv_dev.name='eth0-2_29'
network.lm_net_eth0_2_batadv_dev.ifname='eth0.2'
network.lm_net_eth0_2_batadv_dev.vid='29'
network.lm_net_eth0_2_batadv_dev.mtu='1532'
network.lm_net_eth0_2_batadv_if=interface
network.lm_net_eth0_2_batadv_if.auto='1'
network.lm_net_eth0_2_batadv_if.ifname='eth0-2_29'
network.lm_net_eth0_2_batadv_if.proto='batadv'
network.lm_net_eth0_2_batadv_if.mesh='bat0'
network.lm_net_eth0_2_bmx6_dev=device
network.lm_net_eth0_2_bmx6_dev.type='8021ad'
network.lm_net_eth0_2_bmx6_dev.name='eth0-2_13'
network.lm_net_eth0_2_bmx6_dev.ifname='eth0.2'
network.lm_net_eth0_2_bmx6_dev.vid='13'
network.lm_net_eth0_2_bmx6_dev.mtu='1398'
network.lm_net_eth0_2_bmx6_if=interface
network.lm_net_eth0_2_bmx6_if.proto='none'
network.lm_net_eth0_2_bmx6_if.auto='1'
network.lm_net_eth0_2_bmx6_if.ifname='eth0-2_13'
root@LiMe-16d9e8:~# uci show lime
lime.system=lime
lime.network=lime
lime.wifi=lime
lime.lm_hwd_openwrt_wan=net
lime.lm_hwd_openwrt_wan.autogenerated='true'
lime.lm_hwd_openwrt_wan.protocols='anygw' 'batadv:%N1'
'bmx6:13' 'olsr:14'
'olsr6:15' 'olsr2:16' 'ieee80211s' 'wan'
lime.lm_hwd_openwrt_wan.linux_name='eth0.2'
root@LiMe-16d9e8:~#
Pau <pau(a)dabax.net> schrieb am Di., 23. Mai 2017 um 13:17 Uhr:
On 23/05/17 04:24, Juergen Kimmel wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
Maybe this clarifies:
[ 23.650087] batman_adv: bat0: Changing gw mode from: off to: client
[ 23.703459] batman_adv: bat0: multicast_mode: Changing from: enabled
to:
disabled
[ 23.742264] batman_adv: The newly added mac address
(78:a3:51:16:d9:e9)
already exists on: eth0-2_29
[ 23.751672] batman_adv: It is strongly recommended to keep mac
addresses
unique to avoid problems!
That should not be a real problem, just annoying.
Juergen Kimmel <juergenkimmel(a)gmail.com>
schrieb am Mo., 22. Mai 2017 um
20:25 Uhr:
> Hi all,
> flashed the precompiled binary.
>
> Interface WAN does not come up WAN6 does. So I can't test stability in
> concern of internet traffic.
Does the system recognizes the eth1 device? (ip link show)
Can you paste the output of "uci show network" and "uci show lime" ?
Thanks.
> Minor flaw: Meshpoint SSID isn't set as
usual.
> About every 10 sec dmesg: br-lan: received packet on bat0 with own
> address as source address
> Devices mesh as expected.
>
> Cheers
>
> Pau <pau(a)dabax.net> schrieb am Mo., 22. Mai 2017 um 11:15 Uhr:
>
>>
>>
>> On 21/05/17 23:30, Juergen Kimmel wrote:
>>> Hi Ilario you got me. Has been a typo - minus instead of underscore -.
>>> So this time output ok.
>>> But also this firmware ends in a bootloop triggered by traffic.
>>> Still waiting for daniel golle's efforts on mt7620 drivers
>>>
>>> Cheers
>>
>> Hi Jurgen.
>>
>> There is a patch which may fix some stuff related with 802.11s, but it
>> is not applied automatically. Please, make sure you are using the last
>> lime-sdk (execute git pull).
>>
>> You have to manually execute a script snippet like this:
>>
>> bash snippets/patch_sdk_mac80211.sh
>>
>> Then recompile the packages:
>>
>> ./cooker -b ramips/mt7620
>>
>> And finally cook the firmware
>>
>> ./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
>>
>> Recently I added a way to enable 11s by default (instead of adhoc) in
>> the firmware, you have to use a community profile like this:
>>
>> ./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
>> --community=libremesh/11s
>>
>> ** the communities profiles are listed here:
>> https://github.com/libremesh/network-profiles
>>
>> ** read the README.md of lime-sdk to understand what a community
profile
>> is.
>>
>> You can also download precompiled binaries with the patch and 11s
>> enabled from here:
>>
>>
>>
http://repo.libremesh.org/lime-17.04/targets/ramips/mt7620/zbt-ape522ii/lim…
>>
>> Please, let us know if it works for you. I don't have this hardware and
>> I cannot test by myself.
>>
>> Cheers.
>>
>>>
>>> Ilario Gelmetti <iochesonome(a)gmail.com> schrieb am So., 21. Mai 2017
um
>>> 11:42 Uhr:
>>>
>>>> On 05/20/2017 11:55 PM, Juergen Kimmel wrote:
>>>>> Cooking went flawlessly but output has been a vanilla Lede
firmware.
>>>>> Did I overlook something?
>>>>
>>>> Can you post the cooker command you used?
>>>> I tried to replicate using:
>>>> ./cooker -c ramips/mt7620 --flavor=lime_default
--profile=zbt-ape522ii
>>>> --update-feeds
>>>>
>>>> and I got:
>>>> ls output/ramips/mt7620/zbt-ape522ii/lime_default/
>>>> lede-17.01.1-libremesh-ramips-mt7620-device-zbt-ape522ii.manifest
>>>>
>>
lede-17.01.1-libremesh-ramips-mt7620-zbt-ape522ii-squashfs-sysupgrade.bin
>>>> sha256sums
>>>>
>>>> I can't verify if the image works but I can say it contains many
>>>> LibreMesh related files, using:
>>>> binwalk -e
>>>>
>>
lede-17.01.1-libremesh-ramips-mt7620-zbt-ape522ii-squashfs-sysupgrade.bin
>>
>> Did you use a different lime-sdk command?
>> Can you check the firmware image content with binwalk (is there any
>> other way)?
>> Bye!
>> Ilario
>>
>>
>> _______________________________________________
>> lime-users mailing list
>> lime-users(a)lists.libremesh.org
>> https://lists.libremesh.org/mailman/listinfo/lime-users
>
>
>
> _______________________________________________
> lime-users mailing list
> lime-users(a)lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-users
>
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users