25 May
2019
25 May
'19
6:24 p.m.
photos of the board of the Wi-Tek R1 router:
https://forum.openwrt.org/t/new-device-of-new-brand-wi-tek-wi-r1-router/351…
still working on getting a complete bootlog
On 4/13/19 12:42 PM, Patricio Gibbs via lime-users wrote:
documentation including kernel bootlog here:
https://forum.openwrt.org/t/new-device-of-new-brand-wi-tek-wi-r1-router/351…
On 4/12/19 11:48 AM, Patricio Gibbs via lime-users wrote:
I now have two Wi-Tek WI-R1 routers in my hands,
$25 each band new.
Any news on how to make a LibreMesh image for them? Or... better to
wait a few months for a more stable updated version of LibreMesh?
Also, their hardware range is extensive, and I wonder if it all runs
OpenWrt like these routers:
https://web.archive.org/web/20180823225907/http://wireless-tek.com/product/…
~ Pato
On 4/10/19 6:42 PM, Patricio Gibbs via lime-users wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users Hi again, renewing my previous question to Daniel
of how to help, and
adding a new question:
What's the process to get this router to show up on the list of
supported devices in Chef or the SDK or whatever method? I will get
one sometime soon and I want to know how to make an appropriate
LibreMesh image for it.
cheers,
Patrick
On 3/11/19 3:00 PM, Patricio Gibbs via lime-users wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users > MT7620*N* should be the least problematic,
MT7620*A* can have external
> radio components which are sometimes tricky to detect and support, but
> MT7620*N* is rather trivial and the chip-support in rt2x00 was made
> for
> that variant -- but still, don't expect the performance of ath9k or
> mt76; or bring the will to actively help improving things, there are
> still things missing in the driver and I will help identifying and
> re-implementing them in rt2x00.
Thanks for your detailed response!
Can you tell me in more detail what you mean by "actively help
improving things"? Do I need a JTAG interface and advanced
programming skills? Or can I help just by installing LibreMesh and
running a few diagnostic commands? Extracting the driver? Something
else?
As far as flashing LibreMesh, I guess it depends on the admin
interface for the router... will it work to just upload firmware
through the web interface? Maybe the only way to know is by doing it
and seeing what happens?
Cheers,
Patrick
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users