Re: [lime-users] documentation of how works lepzig mesh (was Control which mesh nodes can connect)

Can someone point me to the network profile of leipzig mesh? I tried and failed.

https://github.com/libremesh/network-profiles On Sun, Jun 9, 2019 at 6:18 PM guifipedro <guifipedro(a)gmail.com> wrote: > > Hi, > > [ cc to list as thinking it is interesting for you too ] > > > We are using SAE with a pre-shared-key as well as BMX7 with signed > > routing information to implement granular access control to our > > local mesh and gateway here in Leipzig > > Daniel, Paul, are you coming to battlemesh.org v12 in Paris? I confirm > that will be there. Would be nice place to clarify how your network > works. > > Questions & Requests > > 1. configuration example / backup : For me it is enough a /etc/config > (backup) of a nanostation for example. Or the libremesh profile you > are using (then I would run that profile in a nanostation to see that > config). Are you running just bmx7, or you have another layer with > batman-advance? > > 1.1 Of course, if you have more documentation related to your network > would be nice > > 2. in another reply Daniel you said that with 4 MB of flash is > impossible to setup all this stack. Confirm. (In my case I would not > need luci) - it's the case for some alfa network antennas > > 3. I have so much devices with 32 MB of RAM, it runs OK with your setup? [1] > > Thank you very much, > Pedro > > [1] > > For example, my network what I would like to migrate to what you did > is (more info http://dsg.ac.upc.edu/qmpsa/index.php): > > ALFA Network N2/N5 > ALFA Network N2/N5 > AMD GX-412TC SOC > AMD GX-412TC SOC > TP-LINK TL-WDR3600/4300/4310 > Ubiquiti Bullet M > Ubiquiti Loco M XW > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M > Ubiquiti Nanostation M XW > Ubiquiti Nanostation M XW > Ubiquiti Nanostation M XW > Ubiquiti Nanostation M XW > Ubiquiti Nanostation M XW > Ubiquiti Nanostation M XW > Ubiquiti Nanostation M XW > Ubiquiti Nanostation M XW > Ubiquiti Rocket M XW > Ubiquiti Rocket M > > notes: > > when there is no XW means XM, for example Ubiquiti Nanostation M => XM series > > my conclusion is that my network right now is so legacy to migrate? > (depends a lot on response 3 / 32 MB RAM issue)