Re: [lime-users] Splash again

On 13/03/17 19:55, Pau wrote: Thank you! Sorry for the long silence. I installed the firmware Pau prepared. Then I followed Bruno's instructions, that is, Nodogsplash installation and configuration (I think both from Gui). But have not been able to make it work. I can only access the Internet if I disable Nodogsplash. But if I enable it, I cannot access the Internet and I do not see any splash page . I cannot ping the router. And the browser does not show anything if I enter my-router-IP-addresss:2050 in the address bar. If you want to to have a look on nodogsplash status, logs and config please see the attachment. Thanks! > On 13/03/17 18:53, bruno vianna wrote: >> Amuza, did you try running >> >> opkg update >> >> before trying to install the nodogsplash package? >> >> >> >> On Mon, Mar 13, 2017 at 10:02 AM, Pau <pau(a)dabax.net> wrote: >>> >>> >>> On 12/03/17 20:34, Amuza wrote: >>>>> AFAIK for the moment there are not plans for >>>>> implementing this. But you could open an issue in github >>>>> so it will be more visible to someone able to implement >>>>> it. >>>> >>>> >>>> I'm not sure if I did right, I don't know much about >>>> Github. I created it at libremesh/lime-packages. Let me >>>> know if I should modify anything. I'm amuuza there. >>>> >>>> https://github.com/libremesh/lime-packages/issues/76 >>>> >>>>> Right now, maybe the easiest is to install Nodogsplash >>>>> into the gateway(s) node(s). >>>> >>>> >>>> Then it is clear, with my limited knowledge and time, I >>>> have to go for the easiest solution. >>>> >>>> I have been trying to follow Bruno's advice, but I have >>>> not been able to install Nodogsplash. >>>> >>>> Please see below my installation attempt. >>>> >>>> I also tried to install the dependencies from Barrier >>>> Breaker with the same unfruitful results. >>>> >>>> And, by the way, why can't I install packages from the >>>> web? >>> >>> Because the current libremesh repository does not have all >>> the packets available on openwrt. In this case >>> iptables-mod-ipopt. >>> >>> I'll try to create a firmware for you with nodogsplash >>> installed and all the dependencies in the next hours. >>> >>>>> >>>> -------------------------------------------------- >>>> root@LiMe-682c94:~# opkg install nodogsplash Unknown >>>> package 'nodogsplash'. Collected errors: * >>>> opkg_install_cmd: Cannot install package nodogsplash. >>>> root@LiMe-682c94:~# root@LiMe-682c94:~# opkg install >>>> http://chef.altermundi.net/downloads/r44952/ar7 >>>> 1xx/packages/routing/nodogsplash_0.9_beta9.9.9-2-20150718_043129_a

>>>>

ipk >>>> Downloading >>>> http://chef.altermundi.net/downloads/r44952/ar71xx/packages/routin

>>>>

gsplash_0.9_beta9.9.9-2-20150718_043129_ar71xx.ipk. >>>> Installing nodogsplash (0.9_beta9.9.9-2-20150718_043129) >>>> to root... Collected errors: * satisfy_dependencies_for: >>>> Cannot satisfy the following dependencies for nodogsplash: >>>> * iptables-mod-ipopt * * opkg_install_cmd: Cannot install >>>> package nodogsplash. root@LiMe-682c94:~# >>>> root@LiMe-682c94:~# opkg install iptables-mod-ipopt Unknown >>>> package 'iptables-mod-ipopt'. Collected errors: * >>>> opkg_install_cmd: Cannot install package >>>> iptables-mod-ipopt. root@LiMe-682c94:~# root@LiMe-682c94:~# >>>> opkg install >>>> https://downloads.openwrt.org/chaos_calmer/15.0 >>>> 5.1/ar71xx/generic/packages/base/iptables-mod-ipopt_1.4.21-1_ar71x

>>>>

Collected errors: >>>> * wfopen: >>>> https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/generic/

>>>>

es/base/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk: >>>> No such file or directory. * pkg_init_from_file: Failed to >>>> extract control file from >>>> https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/generic/

>>>>

es/base/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk. >>>> root@LiMe-682c94:~# root@LiMe-682c94:~# opkg install >>>> /tmp/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk Installing >>>> iptables-mod-ipopt (1.4.21-1) to root... Collected errors: >>>> * satisfy_dependencies_for: Cannot satisfy the following >>>> dependencies for iptables-mod-ipopt: * kmod-ipt-ipopt * >>>> * opkg_install_cmd: Cannot install package >>>> iptables-mod-ipopt. root@LiMe-682c94:~# root@LiMe-682c94:~# >>>> root@LiMe-682c94:~# opkg install >>>> https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71 >>>> xx/generic/packages/base/kmod-ipt-ipopt_3.18.23-1_ar71xx.ipk >>>> Collected errors: * wfopen: >>>> https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/generic/

>>>>

es/base/kmod-ipt-ipopt_3.18.23-1_ar71xx.ipk: >>>> No such file or directory. * pkg_init_from_file: Failed to >>>> extract control file from >>>> https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/generic/

>>>>

es/base/kmod-ipt-ipopt_3.18.23-1_ar71xx.ipk. _______________________________________________ lime-users mailing list lime-users(a)lists.libremesh.org https://lists.libremesh.org/mailman/listinfo/lime-users -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAEBAgAGBQJZIzl5AAoJEF2FWO6p8n2eSuwQANWdSANUGQSxy8K8jA2pk8O5 ICjSH99id2rvAZHYVumba9HYqL+lW3AguAJnqs8cHrS7ZxTZuWmT36PG3yrvm76k 5FCaERMHOGz7U1swSADWt5DzIDrk2sHoyHEpQWNZKQC4rfTr57z1C/5Yh/LrlQP7 ydmIXVz3lob/E1IZ3loKwJXVKasn/iNu2bRV2qjxfaH8bX1y7DZsTvyGSg7E6eWe zYm1cRyjfvGgBe2NOGWT2Rv7Jigzr2o5YSfR21VFX3yFmiWzfZZhRCsk9FHmmK1T dWX3dNxYFDNfOWZZxK48Dwsg1iTrCWWfJtGoKdDBvjfAnQR0MiXrH+pjrVdFJumM bUell7QQkt/V3c6mXnNjIXSU45dZ6tEfjUaCrxKzlm4qE177Umt5tSng6fP6qs4C 0iC685EEshJLfPO0AYsAz7g2hbxlQTuvZsNMKBCcO4AYQ9usyZj4bbebEVU5TrK/ bRDHKXmBEKlKNIUTrkIpev5tMX6ZrQj5O3UP4dj4hRodG5E2pq3/my/td87stHuW fJHnOpz3l6YbD5rONnPLJhn8h/QIucvhHHPirtuLKAkd9eKkcgAYB9JbuvldSByT DRML6noXYG/tPc86z4wRTG0p1uYnMOBXHieaZVHvQKkaISmq52uTimlK+guwEwP+ 8oCS5WoQa345fpDlZgiL =Mzsc -----END PGP SIGNATURE-----