28 Mar
2019
28 Mar
'19
1:19 a.m.
On Thu, Mar 28, 2019 at 02:08:23AM +0100, Pau wrote:
Thanks for the info Daniel, you should make a monthly
report to the
mailing list regarding new hardware stories :)
I found this very nice solution
https://es.aliexpress.com/store/product/Bare-board-OPENWRT-MT7612E-16-256M-…
That looks quite a better (and cheaper) choice rather than the
Mikrotik+MT7612E
Well, it only 100MBit/s fast Ethernet while 802.11AC can do
significantly more throughput... This is sad, because rather then
giving it 3 FastEthernet ports they should have added a external
RGMII phy and just a single Gigabit Ethernet port (the MT7620A chip
would potentialls support that). Also the board in the photo doesn't
have external PA/LNA populated and therefore will not have very good
range.
However maybe there is not (yet) OpenWRT target. It would be nice to
have it :) Please, report back any advice regarding this board.
Cheers.
On 27/3/19 21:33, Kleper wrote:
Hello,
I write to ask in the list that brand and references of equipment
designed to work outdoors can recommend me different from the brand
Ubiquiti because for a couple of months we have been having trouble
changing the firmware to this brand computers that are supposedly
compatible but come with a new firmware version and do not allow the
installation of libreMesh.
I hope you can give us more information about it.
Thank you.
Fernando Castro T
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
--
./p4u
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users