25 Oct
2020
25 Oct
'20
6:32 p.m.
On Sun, Oct 25, 2020 at 06:54:37PM +0100, Juergen Kimmel wrote:
I'm quite sure I deselected the firewall from the
menuconfig
But I Got this:
root@d948:~# opkg info firewall
Package: firewall
Version: 2019-11-22-8174814a-3
Depends: libc, libubox20191228, libubus20191227, libuci20130104, libip4tc2,
libip6tc2, libxtables12, kmod-ipt-core, kmod-ipt-conntrack,
kmod-nf-conntrack6, kmod-ipt-nat
Status: install user installed
Architecture: mipsel_24kc
Conffiles:
/etc/config/firewall
303d858071dfcf1d1e8593168eb9c582a2c774211f23cef4bf7c85e4060a5e8c
/etc/firewall.user
bd68324966481011f5e36570258ad97dd422655c16f3119d48325ed8459de510
Installed-Time: 1603568532
and from syslog:
Sun Oct 25 18:45:27 2020 kern.warn kernel: [11130.094941] ------------[ cut
here ]------------
Sun Oct 25 18:45:27 2020 kern.warn kernel: [11130.099684] WARNING: CPU: 0
PID: 0 at net/sched/sch_generic.c:320 0x802c39c0
Sun Oct 25 18:45:27 2020 kern.info kernel: [11130.106901] NETDEV WATCHDOG:
eth0 (mtk_soc_eth): transmit queue 0 timed out
This is usually caused by the built-in switch not being setup
properly. Ie. please see 'swconfig dev switch0' and check your switch
setup in /etc/config/network.
If you can't figure it out, please retest with stock OpenWrt and
compare the switch configuration with what you got in
/etc/config/network.