19 Apr
2017
19 Apr
'17
5:29 p.m.
On 04/19/2017 05:25 PM, Ruairi Hickey wrote:
While the mesh appears to be up and the stations can
see each other
there is no ip connectivity - if a client is connected to the libremesh.org
via AP node d9:18:6e it can not connect to the internet / outside via AP
d9:44:80.
Hi Ruairi!
Have you plugged an internet connection to a WAN port of your router?
If your router doesn't have a WAN port you will have to configure
another one as WAN (check out /etc/config/lime-example and
http://libremesh.org/docs/changing_network_behavior.html ).
If this doesn't work: can you post the content of /etc/config/network on
your LibreMesh router?
And the output of the "ip address show" commend.
Are there additional steps required to enable this (it
works
out of the box on ad- hoc) ?
No, it should automagically work when you plug the WAN port of the LiMe
router into a LAN port of a router offering a DHCP server and a gateway
to the internet.
Let us know!
Ilario