2 Dec
2020
2 Dec
'20
9:29 a.m.
Hi Amuza,
compare the above mentioned data with the info thisnode.info/cgi-bin/luci
gives you.
Like
[image: amuza.png]
Am Mi., 2. Dez. 2020 um 07:17 Uhr schrieb Ilario Gelmetti <
iochesonome(a)gmail.com>gt;:
On Dec 2, 2020 01:03, amuza <amuza(a)riseup.net> wrote:
Hi again,
My LiMe network uses 10.5.0.0/16.
Among the many addresses I see when I run `ip addr` I find the following:
12: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP group default qlen 1000
link/ether c0:4a:00:7a:b7:ed brd ff:ff:ff:ff:ff:ff
inet 192.168.0.31/24 brd 192.168.0.255 scope global eth0.2
valid_lft forever preferred_lft forever
inet6 fe80::c24a:ff:fe7a:b7ed/64 scope link
valid_lft forever preferred_lft forever
Why do I have an IP address belonging to the 192.168.0.0/24 network?
What is it for?
Hi Amuza!
That looks like the WAN port of a router connected to a non-LibreMesh
router for getting internet access. If this is correct then that address is
for reaching the ISP gateway (your modem) and reaching the internet. And
your LibreMesh node received that IP from the DHCP server on the ISP
modem/router.
Ciao!
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users 