Re: [lime-users] Splash again

hey amuza, i have nodogsplash working like you described, just the captive page, on lime 1607. i checked your nodogsplash.conf. i had comment out the line EnablePreAuth yes to get it to work. Can you try that and let us know if it works? bruno On Mon, May 22, 2017 at 4:18 PM, Amuza <amuza(a)riseup.net> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi again, > > I still would like to have Nodogsplash or any captive portal > solution > working. I don't need authentication, just a splash page. As > you > could > see on my previous message on the thread (below), I was not > able to > make it work. > > Is there anyone around using Nodogsplash -or any other captive > portal- > willing to share their recipe for success? > > Or maybe have a look into my previous message on the thread, > including > the "nds" file I attached -which showed Nodogsplash status, > logs > and > config- and let me know if anything looked wrong? > > Thanks. > > By the way, there is a new Nodogsplash maintenance release [1], > just > in case anyone is interested... > > [1] https://github.com/nodogsplash/nodogsplash/releases/tag/v1. > 0.2 > > > > On 06/04/17 19:01, Amuza wrote: > > > > > > On 13/03/17 19:55, Pau wrote: > > > You can try to install this firmware which includes > > > standard > > > nodogsplash and its dependencies into the gateway node: > > > http://chef.libremesh.org/tmp_builds/ar71xx-generic-16_07/ > > > > Thank you! Sorry for the long silence. > > > > > And then install with opkg the patched Nodogsplash from Gui > > > and > > > apply the configuration that he proposes. > > > > I installed the firmware Pau prepared. Then I followed > > Bruno's > > instructions, that is, Nodogsplash installation and > > configuration > > (I think both from Gui). But have not been able to make it > > work. > > > > I can only access the Internet if I disable Nodogsplash. But > > if I > > enable it, I cannot access the Internet and I do not see any > > splash > > page . > > > > I cannot ping the router. And the browser does not show > > anything > > if > > I enter my-router-IP-addresss:2050 in the address bar. > > > > If you want to to have a look on nodogsplash status, logs and > > config please see the attachment. > > > > Thanks! > > > > > > > > > I might be that you need some opkg --force option, check > > > the > > > help of opkg. > > > Cheers. > > > > > > > On 13/03/17 18:53, bruno vianna wrote: > > > > Amuza, did you try running > > > > > > > > opkg update > > > > > > > > before trying to install the nodogsplash package? > > > > > > > > > > > > > > > > On Mon, Mar 13, 2017 at 10:02 AM, Pau <pau(a)dabax.net> > > > > wrote: > > > > > > > > > > > > > > > On 12/03/17 20:34, Amuza wrote: > > > > > > > AFAIK for the moment there are not plans for > > > > > > > implementing this. But you could open an issue in > > > > > > > github > > > > > > > so it will be more visible to someone able to > > > > > > > implement > > > > > > > it. > > > > > > > > > > > > > > > > > > I'm not sure if I did right, I don't know much about > > > > > > Github. I created it at libremesh/lime-packages. Let > > > > > > me > > > > > > know if I should modify anything. I'm amuuza there. > > > > > > > > > > > > https://github.com/libremesh/lime-packages/issues/76 > > > > > > > > > > > > > Right now, maybe the easiest is to install > > > > > > > Nodogsplash > > > > > > > into the gateway(s) node(s). > > > > > > > > > > > > > > > > > > Then it is clear, with my limited knowledge and time, > > > > > > I > > > > > > have to go for the easiest solution. > > > > > > > > > > > > I have been trying to follow Bruno's advice, but I > > > > > > have > > > > > > not been able to install Nodogsplash. > > > > > > > > > > > > Please see below my installation attempt. > > > > > > > > > > > > I also tried to install the dependencies from Barrier > > > > > > Breaker with the same unfruitful results. > > > > > > > > > > > > And, by the way, why can't I install packages from > > > > > > the > > > > > > web? > > > > > > > > > > Because the current libremesh repository does not have > > > > > all > > > > > the packets available on openwrt. In this case > > > > > iptables-mod-ipopt. > > > > > > > > > > I'll try to create a firmware for you with nodogsplash > > > > > installed and all the dependencies in the next hours. > > > > > > > > > > Cheers. > > > > > > > > > > > -------------------------------------------------- > > > > > > root@LiMe-682c94:~# opkg install nodogsplash Unknown > > > > > > package 'nodogsplash'. Collected errors: * > > > > > > opkg_install_cmd: Cannot install package nodogsplash. > > > > > > root@LiMe-682c94:~# root@LiMe-682c94:~# opkg install > > > > > > http://chef.altermundi.net/downloads/r44952/ar7 > > > > > > 1xx/packages/routing/nodogsplash_0.9_beta9.9.9-2- > > > > > > 20150718_043129_a > > r > > > > > > > > > > 71xx. > > > > > > > > > > > > > > > > ipk > > > > > > Downloading > > > > > > http://chef.altermundi.net/downloads/r44952/ar71xx/pa > > > > > > ckag > > > > > > es/routin > > g > > > > > > > > > > /nodo > > > > > > > > > > > > > > > > gsplash_0.9_beta9.9.9-2-20150718_043129_ar71xx.ipk. > > > > > > Installing nodogsplash (0.9_beta9.9.9-2- > > > > > > 20150718_043129) > > > > > > to root... Collected errors: * > > > > > > satisfy_dependencies_for: > > > > > > Cannot satisfy the following dependencies for > > > > > > nodogsplash: > > > > > > * iptables-mod-ipopt * * opkg_install_cmd: Cannot > > > > > > install > > > > > > package nodogsplash. root@LiMe-682c94:~# > > > > > > root@LiMe-682c94:~# opkg install iptables-mod-ipopt > > > > > > Unknown > > > > > > package 'iptables-mod-ipopt'. Collected errors: * > > > > > > opkg_install_cmd: Cannot install package > > > > > > iptables-mod-ipopt. root@LiMe-682c94:~# root@LiMe-682 > > > > > > c94: > > > > > > ~# > > > > > > opkg install > > > > > > https://downloads.openwrt.org/chaos_calmer/15.0 > > > > > > 5.1/ar71xx/generic/packages/base/iptables-mod- > > > > > > ipopt_1.4.21-1_ar71x > > x > > > > > > > > > > .ipk > > > > > > > > > > > > > > > > Collected errors: > > > > > > * wfopen: > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar > > > > > > 71xx > > > > > > /generic/ > > p > > > > > > > > > > ackag > > > > > > > > > > > > > > > > es/base/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk: > > > > > > No such file or directory. * pkg_init_from_file: > > > > > > Failed > > > > > > to > > > > > > extract control file from > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar > > > > > > 71xx > > > > > > /generic/ > > p > > > > > > > > > > ackag > > > > > > > > > > > > > > > > es/base/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk. > > > > > > root@LiMe-682c94:~# root@LiMe-682c94:~# opkg install > > > > > > /tmp/iptables-mod-ipopt_1.4.21-1_ar71xx.ipk > > > > > > Installing > > > > > > iptables-mod-ipopt (1.4.21-1) to root... Collected > > > > > > errors: > > > > > > * satisfy_dependencies_for: Cannot satisfy the > > > > > > following > > > > > > dependencies for iptables-mod-ipopt: * kmod-ipt- > > > > > > ipopt > > > > > > * > > > > > > * opkg_install_cmd: Cannot install package > > > > > > iptables-mod-ipopt. root@LiMe-682c94:~# root@LiMe-682 > > > > > > c94: > > > > > > ~# > > > > > > root@LiMe-682c94:~# opkg install > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar > > > > > > 71 > > > > > > xx/generic/packages/base/kmod-ipt-ipopt_3.18.23- > > > > > > 1_ar71xx.ipk > > > > > > Collected errors: * wfopen: > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar > > > > > > 71xx > > > > > > /generic/ > > p > > > > > > > > > > ackag > > > > > > > > > > > > > > > > es/base/kmod-ipt-ipopt_3.18.23-1_ar71xx.ipk: > > > > > > No such file or directory. * pkg_init_from_file: > > > > > > Failed > > > > > > to > > > > > > extract control file from > > > > > > https://downloads.openwrt.org/chaos_calmer/15.05.1/ar > > > > > > 71xx > > > > > > /generic/ > > p > > > > > > > > > > ackag > > > > > > > > > > > > > > > > es/base/kmod-ipt-ipopt_3.18.23-1_ar71xx.ipk. > > > > > > root@LiMe-682c94:~# root@LiMe-682c94:~# > > > > > > root@LiMe-682c94:~# opkg install > > > > > > /tmp/kmod-ipt-ipopt_3.18.23-1_ar71xx.ip k Installing > > > > > > kmod-ipt-ipopt (3.18.23-1) to root... Collected > > > > > > errors: * > > > > > > satisfy_dependencies_for: Cannot satisfy the > > > > > > following > > > > > > dependencies for kmod-ipt-ipopt: * kernel (= > > > > > > 3.18.23-1-b2f200610f46d20ef52d269421369d0c) * * > > > > > > opkg_install_cmd: Cannot install package kmod-ipt- > > > > > > ipopt. > > > > > > root@LiMe-682c94:~# root@LiMe-682c94:~# cat > > > > > > /etc/banner > > > > > > _______ ________ __ | > > > > > > > .-----.-----.-----.| | | |.----.| |_ > > > > > > > > - || _ | > > > > > > > > > > > > -__| || | | || _|| _| |_______|| > > > > > > __|_____|__|__||________||__| |____| |__| W I R E L > > > > > > E S > > > > > > S > > > > > > F R E E D O M > > > > > > ----------------------------------------------------- > > > > > > CHAOS CALMER (Chaos Calmer, r49403) > > > > > > ----------------------------------------------------- > > > > > > * 1 > > > > > > 1/2 oz Gin Shake with a glassful * 1/4 oz > > > > > > Triple > > > > > > Sec of broken ice and pour * 3/4 oz Lime Juice > > > > > > unstrained into a goblet. * 1 1/2 oz Orange Juice * 1 > > > > > > tsp. > > > > > > Grenadine Syrup > > > > > > ----------------------------------------------------- > > > > > > ___ > > > > > > __ __ _______ __ > > > > > > | |_|__| > > > > > > > --.----.-----.| | |-----.-----| |--. > > > > > > > | | | _ > > > > > > > _| -__|| | -__|__ --| | > > > > > > > |_____|__|_____|__| > > > > > > > _____||__|_|__|_____|_____|__|__| > > > > > > > > > > > > --------------------------------------------------- > > > > > > --- > > > > > > LiMe 16.07 CommunityChaos (16.07 rev.5fbd38f > > > > > > 20160913_2151) > > > > > > -------------------------------------------------- > > > > > > ---- > > > > > > http://libremesh.org > > > > > > --------------------------------------------------- > > > > > > --- > > > > > > root@LiMe-682c94:~# > > > > > > _______________________________________________ lime- > > > > > > users > > > > > > mailing list lime-users(a)lists.libremesh.org > > > > > > https://lists.libremesh.org/mailman/listinfo/lime-use > > > > > > rs > > > > > > > > > > > > > > > > -- ./p4u > > > > > > > > > > > > > > > _______________________________________________ lime- > > > > > users > > > > > mailing list lime-users(a)lists.libremesh.org > > > > > https://lists.libremesh.org/mailman/listinfo/lime-users > > > > > > > > > > > > > > > > > > > > > _______________________________________________ lime-users > > > mailing list lime-users(a)lists.libremesh.org > > > https://lists.libremesh.org/mailman/listinfo/lime-users > > > > > > > > > > _______________________________________________ lime-users > > mailing > > list lime-users(a)lists.libremesh.org > > https://lists.libremesh.org/mailman/listinfo/lime-users > > > > _______________________________________________ > lime-users mailing list > lime-users(a)lists.libremesh.org > https://lists.libremesh.org/mailman/listinfo/lime-users