30 Dec
2020
30 Dec
'20
6:21 p.m.
LiMe master development (master rev. d4b8732 20201210_2003) / LuCI
openwrt-19.07 branch git-20.341.57626-51f55b5
This happens sometimes when accessing the nodes webui (only one node of
three)
[13503.728170] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[13503.733970] mt76x2e 0000:01:00.0: Build: 1
[13503.738240] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[13503.751667] mt76x2e 0000:01:00.0: Firmware running!
[13503.757335] ieee80211 phy0: Hardware restart was requested
[13505.411576] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[13505.417290] mt76x2e 0000:01:00.0: Build: 1
[13505.421569] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[13505.435799] mt76x2e 0000:01:00.0: Firmware running!
[13505.442058] ieee80211 phy0: Hardware restart was requested
--
Regards
Juergen
30 Dec
30 Dec
7:20 p.m.
Sounds like a hardware issue with mt76. This is a good reason to track
OpenWrt closer. mt76 has pretty big improvements recently heading into
the 20.12 release. See https://github.com/openwrt/mt76/, which OpenWrt
tracks in newer releases.
None of those improvements to mt76 get into
https://github.com/openwrt/openwrt/commits/openwrt-19.07 -- afaict you
only get backports for things that are really broken, security or
non-booting-device-wise.
The most recent updates for 19.07 mt76 seem to be
https://openwrt.org/releases/19.07/notes-19.07.3 -- 20 May 2020.
Martin
On Wed, Dec 30, 2020 at 1:22 PM Juergen Kimmel <juergenkimmel(a)gmail.com> wrote:
LiMe master development (master rev. d4b8732 20201210_2003) / LuCI openwrt-19.07 branch
git-20.341.57626-51f55b5
This happens sometimes when accessing the nodes webui (only one node of three)
[13503.728170] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[13503.733970] mt76x2e 0000:01:00.0: Build: 1
[13503.738240] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[13503.751667] mt76x2e 0000:01:00.0: Firmware running!
[13503.757335] ieee80211 phy0: Hardware restart was requested
[13505.411576] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[13505.417290] mt76x2e 0000:01:00.0: Build: 1
[13505.421569] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[13505.435799] mt76x2e 0000:01:00.0: Firmware running!
[13505.442058] ieee80211 phy0: Hardware restart was requested
--
Regards
Juergen
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
7:37 p.m.
On Wed, Dec 30, 2020 at 07:21:51PM +0100, Juergen Kimmel wrote:
LiMe master development (master rev. d4b8732
20201210_2003) / LuCI
openwrt-19.07 branch git-20.341.57626-51f55b5
This happens sometimes when accessing the nodes webui (only one node of
three)
[13503.728170] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[13503.733970] mt76x2e 0000:01:00.0: Build: 1
[13503.738240] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[13503.751667] mt76x2e 0000:01:00.0: Firmware running!
[13503.757335] ieee80211 phy0: Hardware restart was requested
[13505.411576] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[13505.417290] mt76x2e 0000:01:00.0: Build: 1
[13505.421569] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[13505.435799] mt76x2e 0000:01:00.0: Firmware running!
[13505.442058] ieee80211 phy0: Hardware restart was requested
I've experienced similar issues when using MT7612E mPCIe module on
a base-board which doesn't supply enough power to the chip.
Given that the APE522II I had to play with also broke with some
burned part on the board after a short time I'd consider this being
potentially a hardware issue :(
--
Regards
Juergen
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
1237
days inactive
1237
days old
lime-users@lists.libremesh.org
2 comments
3 participants
participants (3)
-
Daniel Golle -
Juergen Kimmel -
Martin Kennedy