24 Dec
2016
24 Dec
'16
7:16 p.m.
Hi,
I noticed that if I add DNS to DHCP lan server [[HELP: Define additional
DHCP options, for example "6,192.168.2.1,192.168.2.2" which advertises
different DNS servers to clients.]], then wifi connection is impossible...
My node is a BulletM2 and eth0 is configured as WAN.
In that case, WAN dhcp client DNS is used for LAN resolution relay.
Is my case specific to my device?
How does DNS options are transmitted to mesh clients?
Today that first node is installed in front of my house providing free
wifi to neighbors ;) Next step will be to install a "nodogsplash" web
site to invite neighbors to participate with me...
I am wondering how could I calculate customer charge to help paying for
Internet nodes volunteers? Anyone reach that step already?
ONE LOVE
Fred - http://madeinzion.org
24 Dec
24 Dec
7:41 p.m.
2016-12-24 20:16 GMT+01:00 fred <support(a)qo-op.com>om>:
I noticed that if I add DNS to DHCP lan server [[HELP:
Define additional
DHCP options, for example "6,192.168.2.1,192.168.2.2" which advertises
different DNS servers to clients.]], then wifi connection is impossible...
Can you attach your
/etc/config/lime
and
/etc/config/dhcp
files, and others if relevant?
Which version of LibreMesh are you using?
Bye :)
Ilario
8:41 p.m.
Thanks for your quick reply.
Meanwhile, I realize, I forget to put "6," in front of my options (my
eyes!!).
Now my iphone connects but no DNS propagated (still node IP as DNS)
My Android cannot get IP address...
Do you know how DNS is propagated through IPv4 mesh network?
################################################################
root@LiMe-8de281:~# cat /etc/config/lime
# Read the documentation in /etc/config/lime.example file
# and on https://libremesh.org
### System options
config lime system
### Network general option
config lime network
### WiFi general options
config lime wifi
################################################################
cat /etc/config/dhcp
config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option nonegcache '0'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
option localservice '1'
option dhcpscript '/etc/alfred/dnsmasq-lease-share.lua'
option dhcphostsfile '/tmp/dhcp.hosts_remote'
list server '4.2.2.2'
list server '141.1.1.1'
list server '2001:470:20::2'
config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '1h'
list dhcp_option '6,194.25.0.125, 8.8.8.8'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
################################################################
root@LiMe-8de281:~# cat /etc/lime_release
LIME_ID="LiMe"
LIME_RELEASE="16.07"
LIME_CODENAME="CommunityChaos"
LIME_BRANCH="16.07"
LIME_REVISION="5fbd38f"
LIME_DESCRIPTION="LiMe 16.07 CommunityChaos (16.07 rev.5fbd38f
20160913_2151)"
LIME_BUILDDATE="20160913_2151"
Le 24/12/2016 à 15:41, Ilario a écrit :
2016-12-24 20:16 GMT+01:00 fred
<support(a)qo-op.com>om>:
I noticed that if I add DNS to DHCP lan server
[[HELP: Define additional
DHCP options, for example "6,192.168.2.1,192.168.2.2" which advertises
different DNS servers to clients.]], then wifi connection is impossible...
Can you attach your
/etc/config/lime
and
/etc/config/dhcp
files, and others if relevant?
Which version of LibreMesh are you using?
Bye :)
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
9:22 p.m.
Is that option page should be used (see image)?
root@LiMe-8de281:~# cat /tmp/resolv.conf.auto
# Interface wwan
nameserver 192.168.1.1
search home
My node is using my Internet BOX DNS?
I would like to change as some filtering could occur...
Le 24/12/2016 à 16:41, fred a écrit :
Thanks for your quick reply.
Meanwhile, I realize, I forget to put "6," in front of my options (my
eyes!!).
Now my iphone connects but no DNS propagated (still node IP as DNS)
My Android cannot get IP address...
Do you know how DNS is propagated through IPv4 mesh network?
################################################################
root@LiMe-8de281:~# cat /etc/config/lime
# Read the documentation in /etc/config/lime.example file
# and on https://libremesh.org
### System options
config lime system
### Network general option
config lime network
### WiFi general options
config lime wifi
################################################################
cat /etc/config/dhcp
config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option nonegcache '0'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
option localservice '1'
option dhcpscript '/etc/alfred/dnsmasq-lease-share.lua'
option dhcphostsfile '/tmp/dhcp.hosts_remote'
list server '4.2.2.2'
list server '141.1.1.1'
list server '2001:470:20::2'
config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '1h'
list dhcp_option '6,194.25.0.125, 8.8.8.8'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
################################################################
root@LiMe-8de281:~# cat /etc/lime_release
LIME_ID="LiMe"
LIME_RELEASE="16.07"
LIME_CODENAME="CommunityChaos"
LIME_BRANCH="16.07"
LIME_REVISION="5fbd38f"
LIME_DESCRIPTION="LiMe 16.07 CommunityChaos (16.07 rev.5fbd38f
20160913_2151)"
LIME_BUILDDATE="20160913_2151"
Le 24/12/2016 à 15:41, Ilario a écrit :
2016-12-24 20:16 GMT+01:00 fred
<support(a)qo-op.com>om>:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
I noticed that if I add DNS to DHCP lan server
[[HELP: Define additional
DHCP options, for example "6,192.168.2.1,192.168.2.2" which advertises
different DNS servers to clients.]], then wifi connection is impossible...
Can you attach your
/etc/config/lime
and
/etc/config/dhcp
files, and others if relevant?
Which version of LibreMesh are you using?
Bye :)
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
27 Dec
27 Dec
7:23 p.m.
2016-12-24 21:41 GMT+01:00 fred <support(a)qo-op.com>om>:
My node is a BulletM2 and eth0 is configured as WAN.
root@LiMe-8de281:~# cat /etc/config/lime
# Read the documentation in /etc/config/lime.example file
# and on https://libremesh.org
### System options
config lime system
### Network general option
config lime network
### WiFi general options
config lime wifi
How did you configure the eth0 as wan port?
The suggested way is not the OpenWrt one but adding specific interface
configuration in the /etc/config/lime file.
This way all the LiMe stuff (like internet presence checking and
sharing) are going to work, otherwise I don't know :)
I suggest to undo the config on OpenWrt side (maybe with a reset to
default configs?) and to follow these instructions:
https://github.com/libremesh/lime-packages/blob/develop/packages/lime-syste…
So in your case you should add at the end of the /etc/config/lime file
these lines:
config net internetsharing
option linux_name 'eth0'
list protocols 'wan'
then launch "lime-config" command for applying the changes and reboot.
In that case, WAN dhcp client DNS is used for LAN
resolution relay.
Yep, I think so.
Is my case specific to my device?
I don't think so.
Today that first node is installed in front of my
house providing free
wifi to neighbors ;) Next step will be to install a "nodogsplash" web
site to invite neighbors to participate with me...
Amazing!!!
I think http://trizonelabs.com/ is already using nodogsplash.
I am wondering how could I calculate customer charge
to help paying for
Internet nodes volunteers? Anyone reach that step already?
Mmmh not me :/
cat /etc/config/dhcp
config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option nonegcache '0'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
option localservice '1'
option dhcpscript '/etc/alfred/dnsmasq-lease-share.lua'
option dhcphostsfile '/tmp/dhcp.hosts_remote'
list server '4.2.2.2'
list server '141.1.1.1'
list server '2001:470:20::2'
config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '1h'
list dhcp_option '6,194.25.0.125, 8.8.8.8'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
From my really limited experience looks ok...
But
the mechanisms behind this DNS proxy... Totally misterious for me...
How does DNS options are transmitted to mesh clients?
DNS options form your home DHCP server?
LibreMesh should take DNS options and use them for resolving requests
from connected clients...
I'm not sure.
If this is correct, your problem is already solved because the node
should query the custom DNS for answering the clients, can you test
this?
Now my iphone connects but no DNS propagated (still
node IP as DNS)
My Android cannot get IP address...
Can you check which IP does your iphone get?
Let us know :)
Ilario
29 Dec
29 Dec
3:53 a.m.
Ilario, your advise on using /etc/config/lime for adding WAN eth0 worked
like a charm ;) OpenWRT web admin interface is too confusing.
About DNS propagation, my node is using DHCP DNS router provided (my
Orange internet box)... I tried to change DNS on OpenWRT interface, but
couldn't figure out how it affects config files.
I shouldn't use that interface I think.
next in text
I am trying it. From "opkg install nodogsplash"
I found /etc/dnsmasq.d/lime-proto-anygw-10-ipv4.conf but I am not aware
of IPv6 behaviour... I'll keep it untouched for now.
I suggest to undo the config on OpenWrt side (maybe
with a reset to
default configs?) and to follow these instructions:
https://github.com/libremesh/lime-packages/blob/develop/packages/lime-syste…
So in your case you should add at the end of the /etc/config/lime file
these lines:
config net internetsharing
option linux_name 'eth0'
list protocols 'wan'
then launch "lime-config" command for applying the changes and reboot.
PERFECT ACTION ;)
In that case,
WAN dhcp client DNS is used for LAN resolution relay.
Yep, I think so.
Is my case specific to my device?
I don't think so.
Today that first node is installed in front of my
house providing free
wifi to neighbors ;) Next step will be to install a "nodogsplash" web
site to invite neighbors to participate with me...
Amazing!!!
I think http://trizonelabs.com/ is already using nodogsplash. I am wondering how could I calculate customer
charge to help paying for
Internet nodes volunteers? Anyone reach that step already?
Mmmh not me :/
cat /etc/config/dhcp
config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option nonegcache '0'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
option localservice '1'
option dhcpscript '/etc/alfred/dnsmasq-lease-share.lua'
option dhcphostsfile '/tmp/dhcp.hosts_remote'
list server '4.2.2.2'
list server '141.1.1.1'
list server '2001:470:20::2'
config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '1h'
list dhcp_option '6,194.25.0.125, 8.8.8.8'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
From my really limited experience looks ok...
But the mechanisms behind this DNS proxy... Totally misterious for me...
How does DNS options are transmitted to mesh
clients?
DNS options form your home DHCP server?
LibreMesh should take DNS options and use them for resolving requests
from connected clients...
I'm not sure.
If this is correct, your problem is already solved because the node
should query the custom DNS for answering the clients, can you test
this? Now my iphone connects but no DNS propagated
(still node IP as DNS)
My Android cannot get IP address...
Can you check which IP does your iphone get? From web admin, I received 192.168 IPs (from my DHCP
internet router),
but no connexion. Since I configured with CLI, 10.109 IPs are
received
and internet routing is OK ;)
Let us know :)
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
2683
days inactive
2688
days old
lime-users@lists.libremesh.org
5 comments
2 participants
participants (2)
-
fred -
Ilario