28 Jul
2018
28 Jul
'18
1:22 p.m.
Libremesh cooker offers a network profile "qmp-V1"
Does this mean this profile meshes with qmp nodes?
28 Jul
28 Jul
5:19 p.m.
Yes, it works with qMp. I tested it. But qMp allows you to use all wireless
channels and libremesh (at least in chef.libremesh.org), no. So you
would need to adapt your mesh network to the few legal channels or
build your own firmware/libremesh
On Sat, Jul 28, 2018 at 3:22 PM, Juergen Kimmel <juergenkimmel(a)gmail.com> wrote:
Libremesh cooker offers a network profile
"qmp-V1"
Does this mean this profile meshes with qmp nodes?
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
5:44 p.m.
What makes the network profile qmp-v1 unique to mesh with Qmp?
guifipedro <guifipedro(a)gmail.com> schrieb am Sa., 28. Juli 2018, 19:19:
Yes, it works with qMp. I tested it. But qMp allows
you to use all wireless
channels and libremesh (at least in chef.libremesh.org), no. So you
would need to adapt your mesh network to the few legal channels or
build your own firmware/libremesh
On Sat, Jul 28, 2018 at 3:22 PM, Juergen Kimmel <juergenkimmel(a)gmail.com>
wrote:
Libremesh cooker offers a network profile
"qmp-V1"
Does this mean this profile meshes with qmp nodes?
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users 
6:15 p.m.
For details, check the network-profile [0], basically it just sets BMX6
to a specific channel and uses the 8021q mode, while LibreMesh uses
something else, which I forgot...
[0]:
https://github.com/MoinhoDigital/network-profiles/blob/master/qmp/v1/etc/co…
On 2018-07-29 02:44, Juergen Kimmel wrote:
What makes the network profile qmp-v1 unique to mesh
with Qmp?
guifipedro <guifipedro(a)gmail.com <mailto:guifipedro@gmail.com>>
schrieb am Sa., 28. Juli 2018, 19:19:
Yes, it works with qMp. I tested it. But qMp allows you to use all
wireless
channels and libremesh (at least in chef.libremesh.org
<http://chef.libremesh.org>), no. So you
would need to adapt your mesh network to the few legal channels or
build your own firmware/libremesh
On Sat, Jul 28, 2018 at 3:22 PM, Juergen Kimmel
<juergenkimmel(a)gmail.com <mailto:juergenkimmel@gmail.com>> wrote:
Libremesh cooker offers a network profile
"qmp-V1"
Does this mean this profile meshes with qmp nodes?
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
<mailto:lime-users@lists.libremesh.org>
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org>
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
29 Jul
29 Jul
1:07 a.m.
Check this https://github.com/libremesh/network-profiles/issues/12
highlights:
- bmx6 in vlan12 with 8021q mode [1]
- plus bssid is this one [2]
[1]
https://github.com/MoinhoDigital/network-profiles/blob/master/qmp/v1/etc/co…
[2]
https://github.com/MoinhoDigital/network-profiles/blob/master/qmp/v1/etc/co…
On Sat, Jul 28, 2018 at 8:15 PM, Paul Spooren <mail(a)aparcar.org> wrote:
For details, check the network-profile [0], basically
it just sets BMX6
to a specific channel and uses the 8021q mode, while LibreMesh uses
something else, which I forgot...
[0]:
https://github.com/MoinhoDigital/network-profiles/blob/master/qmp/v1/etc/co…
On 2018-07-29 02:44, Juergen Kimmel wrote:
What makes the network profile qmp-v1 unique to
mesh with Qmp?
guifipedro <guifipedro(a)gmail.com <mailto:guifipedro@gmail.com>>
schrieb am Sa., 28. Juli 2018, 19:19:
Yes, it works with qMp. I tested it. But qMp allows you to use all
wireless
channels and libremesh (at least in chef.libremesh.org
<http://chef.libremesh.org>), no. So you
would need to adapt your mesh network to the few legal channels or
build your own firmware/libremesh
On Sat, Jul 28, 2018 at 3:22 PM, Juergen Kimmel
<juergenkimmel(a)gmail.com <mailto:juergenkimmel@gmail.com>> wrote:
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users Libremesh cooker offers a network profile
"qmp-V1"
Does this mean this profile meshes with qmp nodes?
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
<mailto:lime-users@lists.libremesh.org>
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org>
https://lists.libremesh.org/mailman/listinfo/lime-users
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
2279
days inactive
2280
days old
lime-users@lists.libremesh.org
4 comments
3 participants
participants (3)
-
guifipedro -
Juergen Kimmel -
Paul Spooren